Dear Lucas Stach, > There are multiple changes needed to make AX88772B work: > > 1. add vendor and product ID (trivial) > > 2. We need to read out the MAC address from the EEPROM and write > it into the NodeID register manually. > > 3. The packet length check has to be adjusted, as all ASIX chips > only use 11 bits to indicate the length. AX88772B uses the other > bits to indicate unrelated things, which cause the check to fail. > This fix is based on a fix for the Linux kernel by Marek Vasut. > Linux upstream commit: bca0beb9363f8487ac902931a50eb00180a2d14a > > 4. AX88772B provides several bulk endpoints. Only the first > IN/OUT endpoints work in the default configuration. So stop > enumeration after we found them to avoid overwriting the > endpoint config with a non-working one. > > This was tested to work on a Colibri T20 board. > Patch is based on u-boot-net/next. > > v2: > - split out eeprom mac load into separate function > - add flags to driver to get a clean way to enable workarounds > or special functions [...]
Quick review looks fine to me, Joe? Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
