From: Jeong-Hyeon Kim <jh...@insignal.co.kr>
Origen QUAD board is based on Samsung Exynos4412 SoC.
Signed-off-by: Jeong-Hyeon Kim <jh...@insignal.co.kr>
---
board/insignal/origen_quad/Makefile | 63 ++++++
board/insignal/origen_quad/boot.c | 63 ++++++
board/insignal/origen_quad/clock.c | 103 ++++++++++
board/insignal/origen_quad/dmc.c | 174 ++++++++++++++++
board/insignal/origen_quad/lowlevel_init.S | 158 +++++++++++++++
board/insignal/origen_quad/origen_quad.c | 154 ++++++++++++++
board/insignal/origen_quad/pmic.c | 47 +++++
board/insignal/origen_quad/setup.h | 298 ++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/origen_quad.h | 183 +++++++++++++++++
tools/Makefile | 2 +
11 files changed, 1246 insertions(+), 0 deletions(-)
create mode 100644 board/insignal/origen_quad/Makefile
create mode 100644 board/insignal/origen_quad/boot.c
create mode 100644 board/insignal/origen_quad/clock.c
create mode 100644 board/insignal/origen_quad/dmc.c
create mode 100644 board/insignal/origen_quad/lowlevel_init.S
create mode 100644 board/insignal/origen_quad/origen_quad.c
create mode 100644 board/insignal/origen_quad/pmic.c
create mode 100644 board/insignal/origen_quad/setup.h
create mode 100644 include/configs/origen_quad.h
diff --git a/board/insignal/origen_quad/Makefile
b/board/insignal/origen_quad/Makefile
new file mode 100644
index 0000000..04f609a
--- /dev/null
+++ b/board/insignal/origen_quad/Makefile
@@ -0,0 +1,63 @@
+#
+# Copyright (C) 2012 Samsung Electronics
+#
+# Copyright (C) 2012 Insignal
+#
+# Makefile for the Insignal OrigenQUAD board (Exynos4x12)
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+SOBJS := lowlevel_init.o
+
+COBJS := clock.o
+COBJS += dmc.o
+
+ifdef CONFIG_PMIC
+COBJS += pmic.o
+endif
+
+ifndef CONFIG_SPL_BUILD
+COBJS += origen_quad.o
+else
+COBJS += boot.o
+endif
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+ALL := $(obj).depend $(LIB)
+
+all: $(ALL)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/insignal/origen_quad/boot.c
b/board/insignal/origen_quad/boot.c
new file mode 100644
index 0000000..10f2289
--- /dev/null
+++ b/board/insignal/origen_quad/boot.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Copyright (C) 2012 Insignal
+ *
+ * Board initialize for the Insignal OrigenQUAD board (Exynos4x12)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include "setup.h"
+
+#define IRAM_ADDRESS 0x02020000
+#define EXTERNAL_FUNC_ADDRESS (IRAM_ADDRESS + 0x0030)
+#define IROM_READ_SDMMC EXTERNAL_FUNC_ADDRESS
+
+void inline irom_read_sdmmc(u32 start, u32 count, u32 addr)
+{
+ void (*read_sdmmc)(u32, u32, u32) = (void *) *(u32 *)IROM_READ_SDMMC;
+ read_sdmmc(start, count, addr);
+}
+
+void board_init_f(unsigned long bootflag)
+{
+ __attribute__((noreturn)) void (*uboot)(void);
+
+ irom_read_sdmmc(BL2_BLK_OFFSET, BL2_BLK_COUNT, CONFIG_SYS_TEXT_BASE);
+
+ /* Jump to U-Boot image */
+ uboot = (void *)CONFIG_SYS_TEXT_BASE;
+ (*uboot)();
+ /* Never returns Here */
+}
+
+/* Place Holders */
+void board_init_r(gd_t *id, ulong dest_addr)
+{
+ /* Function attribute is no-return */
+ /* This Function never executes */
+ while (1);
+}
+
+void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
+{
+}
diff --git a/board/insignal/origen_quad/clock.c
b/board/insignal/origen_quad/clock.c
new file mode 100644
index 0000000..7cdd78d
--- /dev/null
+++ b/board/insignal/origen_quad/clock.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Copyright (C) 2012 Insignal
+ *
+ * Clock setup for the Insignal OrigenQUAD board (Exynos4x12)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include "setup.h"
+
+void clock_ctrl_init(void)
+{
+ struct exynos4_clock *clk = (struct exynos4_clock *)EXYNOS4_CLOCK_BASE;
+ unsigned int val;
+
+ /* CLK_SRC_CPU */
+ writel(0x00000000, &clk->src_cpu);
+ sdelay(0x10000);
+
+ /* CLK_DIV_DMC */
+ writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0);
+ writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1);
+
+ /* CLK_SRC_TOP */
+ writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+ writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+ sdelay(0x10000);
+ writel(CLK_DIV_TOP_VAL, &clk->div_top);
+
+ /* LEFTBUS */
+ writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus);
+ sdelay(0x10000);
+ writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus);
+ /* RIGHTBUS */
+ writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus);
+ sdelay(0x10000);
+ writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus);
+
+ /* PLL locktime */
+ writel(APLL_LOCK_VAL, &clk->apll_lock);
+ writel(MPLL_LOCK_VAL, &clk->mpll_lock);
+ writel(EPLL_LOCK_VAL, &clk->epll_lock);
+ writel(VPLL_LOCK_VAL, &clk->vpll_lock);
+
+ /* CLK_DIV_CPU0/1 */
+ writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0);
+ writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
+
+ /* APLL */
+ writel(APLL_CON1_VAL, &clk->apll_con1);
+ writel(APLL_CON0_VAL, &clk->apll_con0);
+ /* MPLL */
+ writel(MPLL_CON1_VAL, &clk->mpll_con1);
+ writel(MPLL_CON0_VAL, &clk->mpll_con0);
+ /* EPLL */
+ writel(EPLL_CON2_VAL, &clk->epll_con2);
+ writel(EPLL_CON1_VAL, &clk->epll_con1);
+ writel(EPLL_CON0_VAL, &clk->epll_con0);
+ /* VPLL */
+ writel(VPLL_CON2_VAL, &clk->vpll_con2);
+ writel(VPLL_CON1_VAL, &clk->vpll_con1);
+ writel(VPLL_CON0_VAL, &clk->vpll_con0);
+ sdelay(0x40000);
+
+ writel(CLK_SRC_CPU_VAL, &clk->src_cpu);
+ writel(CLK_SRC_DMC_VAL, &clk->src_dmc);
+ writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+ writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+ sdelay(0x10000);
+
+ /* UART */
+ writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0);
+ writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0);
+
+ /* for IROM */
+ /* CLK_DIV_FSYS2 */
+ writel(0x0000000F, &clk->div_fsys2); /* MMC2 - SDMMC */
+ /* CLK_DIV_FSYS3 */
+ writel(0x00000100, &clk->div_fsys3); /* MMC4 - eMMC */
+}
+
diff --git a/board/insignal/origen_quad/dmc.c b/board/insignal/origen_quad/dmc.c
new file mode 100644
index 0000000..a593388
--- /dev/null
+++ b/board/insignal/origen_quad/dmc.c
@@ -0,0 +1,174 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Copyright (C) 2012 Insignal
+ *
+ * Memory setup for the Insignal OrigenQUAD board (Exynos4x12)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include "setup.h"
+
+#define DMC_concontrol 0x00
+#define DMC_memcontrol 0x04
+#define DMC_memconfig0 0x08
+#define DMC_memconfig1 0x0C
+#define DMC_directcmd 0x10
+#define DMC_prechconfig 0x14
+#define DMC_phycontrol0 0x18
+#define DMC_phycontrol1 0x1C
+#define DMC_phycontrol2 0x20
+#define DMC_timingref 0x30
+#define DMC_timingrow 0x34
+#define DMC_timingdata 0x38
+#define DMC_timingpower 0x3C
+#define DMC_phyzqcontrol 0x44
+#define DMC_ivcontrol 0xF0
+
+void mem_ctrl_init(void)
+{
+ struct exynos4_clock *clk = (struct exynos4_clock *)EXYNOS4_CLOCK_BASE;
+ struct exynos4_dmc *dmc0 = (struct exynos4_dmc *)(EXYNOS4_MIU_BASE);
+ struct exynos4_dmc *dmc1 = (struct exynos4_dmc *)(EXYNOS4_MIU_BASE +
0x10000);
+
+ /* Set DMC to 50MHz for IROM */
+ writel(0x00117713, &clk->div_dmc0);
+
+ /*
+ * DMC 0
+ */
+ writel(0xE3855403, &dmc0->phyzqcontrol);
+ writel(0x71101008, &dmc0->phycontrol0);
+ writel(0x7110100A, &dmc0->phycontrol0);
+ writel(0x00000084, &dmc0->phycontrol1);
+ writel(0x71101008, &dmc0->phycontrol0);
+ writel(0x0000008C, &dmc0->phycontrol1);
+ writel(0x00000084, &dmc0->phycontrol1);
+ writel(0x0000008C, &dmc0->phycontrol1);
+ writel(0x00000084, &dmc0->phycontrol1);
+ writel(0x0FFF30CA, &dmc0->concontrol);
+ writel(0x00202500, &dmc0->memcontrol);
+ writel(0x40C01323, &dmc0->memconfig0);
+ writel(0x80000007, &dmc0->ivcontrol);
+
+ writel(0x64000000, &dmc0->prechconfig);
+ writel(0x9C4000FF, &dmc0->phycontrol0);
+ writel(0x0000005D, &dmc0->timingref);
+
+#if (CONFIG_CLK_MPLL == 330)
+ writel(0x2b47654e, &dmc0->timingrow);
+ writel(0x35330306, &dmc0->timingdata);
+ writel(0x442f0365, &dmc0->timingpower);
+#else
+ writel(0x34498691, &dmc0->timingrow);
+ writel(0x36330306, &dmc0->timingdata);
+ writel(0x50380365, &dmc0->timingpower);
+#endif
+ sdelay(0x100000);
+
+ writel(0x07000000, &dmc0->directcmd);
+ sdelay(0x100000);
+
+ writel(0x00071C00, &dmc0->directcmd);
+ sdelay(0x100000);
+
+ writel(0x00010BFC, &dmc0->directcmd);
+ sdelay(0x100000);
+
+ writel(0x00000608, &dmc0->directcmd);
+ writel(0x00000810, &dmc0->directcmd);
+ writel(0x00000C08, &dmc0->directcmd);
+
+ /*
+ * DMC 1
+ */
+ writel(0xE3855403, &dmc1->phyzqcontrol);
+ writel(0x71101008, &dmc1->phycontrol0);
+ writel(0x7110100A, &dmc1->phycontrol0);
+ writel(0x00000084, &dmc1->phycontrol1);
+ writel(0x71101008, &dmc1->phycontrol0);
+ writel(0x0000008C, &dmc1->phycontrol1);
+ writel(0x00000084, &dmc1->phycontrol1);
+ writel(0x0000008C, &dmc1->phycontrol1);
+ writel(0x00000084, &dmc1->phycontrol1);
+ writel(0x0FFF30CA, &dmc1->concontrol);
+ writel(0x00202500, &dmc1->memcontrol);
+ writel(0x40C01323, &dmc1->memconfig0);
+ writel(0x80000007, &dmc1->ivcontrol);
+ writel(0x64000000, &dmc1->prechconfig);
+ writel(0x9C4000FF, &dmc1->phycontrol0);
+ writel(0x0000005D, &dmc1->timingref);
+
+#if (CONFIG_CLK_MPLL == 330)
+ writel(0x2b47654e, &dmc1->timingrow);
+ writel(0x35330306, &dmc1->timingdata);
+ writel(0x442f0365, &dmc1->timingpower);
+#else
+ writel(0x34498691, &dmc1->timingrow);
+ writel(0x36330306, &dmc1->timingdata);
+ writel(0x50380365, &dmc1->timingpower);
+#endif
+ sdelay(0x100000);
+
+ writel(0x07000000, &dmc1->directcmd);
+ sdelay(0x100000);
+
+ writel(0x00071C00, &dmc1->directcmd);
+ sdelay(0x100000);
+
+ writel(0x00010BFC, &dmc1->directcmd);
+ sdelay(0x100000);
+
+ writel(0x00000608, &dmc1->directcmd);
+ writel(0x00000810, &dmc1->directcmd);
+ writel(0x00000C08, &dmc1->directcmd);
+}
+
+void mem_ctrl_init_2nd(void)
+{
+ struct exynos4_dmc *dmc0 = (struct exynos4_dmc *)(EXYNOS4_MIU_BASE);
+ struct exynos4_dmc *dmc1 = (struct exynos4_dmc *)(EXYNOS4_MIU_BASE +
0x10000);
+
+ writel(0x7F10100A, &dmc0->phycontrol0);
+ writel(0xE0000084, &dmc0->phycontrol1);
+ writel(0x7F10100B, &dmc0->phycontrol0);
+ sdelay(20000);
+ writel(0x0000008C, &dmc0->phycontrol1);
+ writel(0x00000084, &dmc0->phycontrol1);
+ sdelay(20000);
+
+ writel(0x7F10100A, &dmc1->phycontrol0);
+ writel(0xE0000084, &dmc1->phycontrol1);
+ writel(0x7F10100B, &dmc1->phycontrol0);
+ sdelay(20000);
+ writel(0x0000008C, &dmc1->phycontrol1);
+ writel(0x00000084, &dmc1->phycontrol1);
+ sdelay(20000);
+
+ writel(0x0FFF30FA, &dmc0->concontrol);
+ writel(0x0FFF30FA, &dmc1->concontrol);
+ writel(0x00202533, &dmc0->memcontrol);
+ writel(0x00202533, &dmc1->memcontrol);
+}
diff --git a/board/insignal/origen_quad/lowlevel_init.S
b/board/insignal/origen_quad/lowlevel_init.S
new file mode 100644
index 0000000..427b5c6
--- /dev/null
+++ b/board/insignal/origen_quad/lowlevel_init.S
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Copyright (C) 2012 Insignal
+ *
+ * Lowlevel initialize for the Insignal OrigenQUAD board (Exynos4x12)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include "setup.h"
+
+_TEXT_BASE:
+ .word CONFIG_SYS_TEXT_BASE
+
+ .globl lowlevel_init
+lowlevel_init:
+
+ /* use iRAM stack in bl2 */
+ ldr sp, =0x02060000
+ stmdb r13!, {ip,lr}
+
+ /* check reset status */
+ ldr r0, =(EXYNOS4_POWER_BASE + 0x800) /* INFORM1 */
+ ldr r1, [r0]
+
+ /* AFTR wakeup reset */
+ ldr r2, =S5P_CHECK_DIDLE
+ cmp r1, r2
+ beq exit_wakeup
+
+ /* LPA wakeup reset */
+ ldr r2, =S5P_CHECK_LPA
+ cmp r1, r2
+ beq exit_wakeup
+
+ /* Sleep wakeup reset */
+ ldr r2, =S5P_CHECK_SLEEP
+ cmp r1, r2
+ beq wakeup_reset
+
+ /*
+ * If U-boot is already running in RAM, no need to relocate U-Boot.
+ * Memory controller must be configured before relocating U-Boot
+ * in ram.
+ */
+ ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
+ bic r1, pc, r0 /* pc <- current addr of code */
+ /* r1 <- unmasked bits of pc */
+ ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
+ bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
+ cmp r1, r2 /* compare r1, r2 */
+ beq 1f /* r0 == r1 then skip sdram init */
+
+#ifdef CONFIG_PMIC
+ /* PMIC initialize */
+ bl pmic_init
+#endif
+
+ /* DMC initialize */
+ bl mem_ctrl_init
+
+ /* CMU initialize */
+ bl clock_ctrl_init
+
+ /* DMC initialize */
+ bl mem_ctrl_init_2nd
+
+ /* Trust zone initialize */
+ bl tzpc_init
+
+1:
+ ldmia r13!, {ip,pc}
+
+wakeup_reset:
+ bl clock_ctrl_init
+ bl mem_ctrl_init
+ bl tzpc_init
+
+exit_wakeup:
+ /* Load return address and jump to kernel */
+ ldr r0, =(EXYNOS4_POWER_BASE + 0x800) /* INFORM0 */
+
+ /* r1 = physical address of exynos4_cpu_resume function*/
+ ldr r1, [r0]
+
+ /* Jump to kernel */
+ mov pc, r1
+ nop
+ nop
+
+/*
+ * Setting TZPC[TrustZone Protection Controller]
+ */
+tzpc_init:
+
+ ldr r0, =TZPC0_BASE
+ mov r1, #0x0
+ str r1, [r0]
+ mov r1, #0xff
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ mov r1, #0xbd
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ mov r1, #0xff
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC1_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC2_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC3_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC4_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC5_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ mov pc, lr
+
diff --git a/board/insignal/origen_quad/origen_quad.c
b/board/insignal/origen_quad/origen_quad.c
new file mode 100644
index 0000000..51bf5ff
--- /dev/null
+++ b/board/insignal/origen_quad/origen_quad.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Copyright (C) 2012 Insignal
+ *
+ * Board initialize for the Insignal OrigenQUAD board (Exynos4x12)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/power.h>
+#include "setup.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ printf("\nBoard: " CONFIG_BOARDNAME "\n");
+ return 0;
+}
+#endif
+
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
+
+#ifdef CONFIG_RESERVED_DRAM
+ gd->ram_size -= CONFIG_RESERVED_DRAM;
+#endif
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
PHYS_SDRAM_2_SIZE);
+ gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+ gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3,
PHYS_SDRAM_3_SIZE);
+ gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+ gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4,
PHYS_SDRAM_4_SIZE);
+
+#ifdef CONFIG_RESERVED_DRAM
+ gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= CONFIG_RESERVED_DRAM;
+#endif
+}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_emmc_init(void)
+{
+ int err;
+ err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
+ if (err) {
+ debug("SDMMC0 not configured\n");
+ return err;
+ }
+ return s5p_mmc_init(0, 8);
+}
+
+int board_sdmmc_init(void)
+{
+ int err;
+ err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("SDMMC2 not configured\n");
+ return err;
+ }
+ return s5p_mmc_init(2, 4);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ int err;
+
+ struct exynos4_power *power = (struct exynos4_power
*)samsung_get_base_power();
+
+ if ((power->om_stat & 0x1E) == 0x8) {
+ err = board_emmc_init();
+ err = board_sdmmc_init();
+ } else {
+ err = board_sdmmc_init();
+ err = board_emmc_init();
+ }
+
+ return 0;
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SMC911X
+ if (smc9115_pre_init())
+ return -1;
+ return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return 0;
+}
+
+static int board_uart_init(void)
+{
+ int err;
+ err = exynos_pinmux_config(PERIPH_ID_UART, PINMUX_FLAG_NONE);
+ if (err)
+ debug("UART%d not configured\n",
+ PERIPH_ID_UART - PERIPH_ID_UART0);
+ return err;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+ int err;
+ err = board_uart_init();
+ if (err)
+ debug("UART%d init failed\n",
+ PERIPH_ID_UART - PERIPH_ID_UART0);
+ return err;
+}
+#endif
diff --git a/board/insignal/origen_quad/pmic.c
b/board/insignal/origen_quad/pmic.c
new file mode 100644
index 0000000..070a3a5
--- /dev/null
+++ b/board/insignal/origen_quad/pmic.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Copyright (C) 2012 Insignal
+ *
+ * PMIC setup for the Insignal OrigenQUAD board (Exynos4x12)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include "setup.h"
+
+int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
+{
+ return 0;
+}
+
+int pmic_reg_write(struct pmic *p, u32 reg, u32 *val)
+{
+ return 0;
+}
+
+void pmic_init(void)
+{
+ /* PS-Hold high */
+ writel(0x5300, EXYNOS4_POWER_BASE + 0x330c);
+}
+
diff --git a/board/insignal/origen_quad/setup.h
b/board/insignal/origen_quad/setup.h
new file mode 100644
index 0000000..98a6171
--- /dev/null
+++ b/board/insignal/origen_quad/setup.h
@@ -0,0 +1,298 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Copyright (C) 2012 Insignal
+ *
+ * Configuration settings for the Insignal Origen QUAD board (Exynos4412)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SETUP_ORIGEN_QUAD_H
+#define __SETUP_ORIGEN_QUAD_H
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+/* Set PLL */
+#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
+
+/* APLL */
+#define set_clk_div_cpu0(core2, apll, pclk_dbg, atb, periph, corem1,
corem0, core) \
+ ((core2 << 28) \
+ |(apll << 24) \
+ |(pclk_dbg << 20) \
+ |(atb << 16) \
+ |(periph <<12) \
+ |(corem1 << 8) \
+ |(corem0 << 4) \
+ |(core))
+#define set_clk_div_cpu1(cores, hpm, copy) \
+ ((cores << 8) \
+ |(hpm << 4) \
+ |(copy))
+
+#if (CONFIG_CLK_APLL == 800)
+#define APLL_CON0_VAL set_pll(0x64, 0x3, 0x0)
+#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 1, 1, 3, 7, 5, 2, 0)
+#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(3, 0, 3)
+#elif (CONFIG_CLK_APLL == 1000)
+#define APLL_CON0_VAL set_pll(0x7D, 0x3, 0x0)
+#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 1, 1, 4, 7, 5, 2, 0)
+#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(3, 0, 4)
+#elif (CONFIG_CLK_APLL == 1100)
+#define APLL_CON0_VAL set_pll(0x113, 0x6, 0x0)
+#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 2, 1, 4, 7, 6, 3, 0)
+#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(4, 0, 4)
+#elif (CONFIG_CLK_APLL == 1200)
+#define APLL_CON0_VAL set_pll(0x96, 0x3, 0x0)
+#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 2, 1, 5, 7, 7, 3, 0)
+#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(4, 0, 4)
+#elif (CONFIG_CLK_APLL == 1300)
+#define APLL_CON0_VAL set_pll(0x145, 0x6, 0x0)
+#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 2, 1, 5, 7, 7, 3, 0)
+#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(5, 0, 5)
+#elif (CONFIG_CLK_APLL == 1400)
+#define APLL_CON0_VAL set_pll(0xAF, 0x3, 0x0)
+#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 2, 1, 6, 7, 7, 3, 0)
+#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(5, 0, 6)
+#elif (CONFIG_CLK_APLL == 1500)
+#define APLL_CON0_VAL set_pll(0xFA, 0x3, 0x0)
+#define CLK_DIV_CPU0_VAL set_clk_div_cpu0(0, 2, 1, 6, 7, 7, 4, 0)
+#define CLK_DIV_CPU1_VAL set_clk_div_cpu1(5, 0, 6)
+#else
+#error Not supported APLL freq
+#endif
+
+#define APLL_CON1_VAL (0x00803800)
+#define APLL_LOCK_VAL (((APLL_CON0_VAL >> 8) & 0x3F) * 270)
+
+/* EPLL */
+#define EPLL_CON0_VAL set_pll(0x40, 0x2, 0x3)
+#define EPLL_CON1_VAL (0x66010000)
+#define EPLL_CON2_VAL (0x00000080)
+#define EPLL_LOCK_VAL (((EPLL_CON0_VAL >> 8) & 0x3F) * 3000)
+
+/* MPLL */
+#if (CONFIG_CLK_MPLL == 200)
+#define MPLL_CON0_VAL set_pll(0x64, 0x3, 0x1)
+#elif (CONFIG_CLK_MPLL == 330)
+#define MPLL_CON0_VAL set_pll(0x116, 0x5, 0x1)
+#elif (CONFIG_CLK_MPLL == 400)
+#define MPLL_CON0_VAL set_pll(0x64, 0x3, 0x0)
+#else
+#error Not supported MPLL freq
+#endif
+#define MPLL_CON1_VAL (0x00803800)
+#define MPLL_LOCK_VAL (((MPLL_CON0_VAL >> 8) & 0x3F) * 270)
+
+/* VPLL */
+#define VPLL_CON0_VAL set_pll(0x48, 0x2, 0x3)
+#define VPLL_CON1_VAL (0x66010000)
+#define VPLL_CON2_VAL (0x00000080)
+#define VPLL_LOCK_VAL (((EPLL_CON0_VAL >> 8) & 0x3F) * 3000)
+
+/* CLK_SRC_CPU */
+#define MUX_MPLL_USER_SEL 1
+#define MUX_HPM_SEL 0
+#define MUX_CORE_SEL 0
+#define MUX_APLL_SEL 1
+#define CLK_SRC_CPU_VAL ((MUX_MPLL_USER_SEL << 24) \
+ |(MUX_HPM_SEL << 20) \
+ |(MUX_CORE_SEL << 16) \
+ |(MUX_APLL_SEL))
+
+/* CLK_SRC_TOP0 */
+#define MUX_ONENAND_SEL 0x0 /* 0 = DOUT133, 1 = DOUT166
*/
+#define MUX_ACLK_133_SEL 0x0 /* 0 = SCLKMPLL, 1 = SCLKAPLL
*/
+#define MUX_ACLK_160_SEL 0x0
+#define MUX_ACLK_100_SEL 0x0
+#define MUX_ACLK_200_SEL 0x0
+#define MUX_VPLL_SEL 0x1
+#define MUX_EPLL_SEL 0x1
+#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL << 28) \
+ |(MUX_ACLK_133_SEL << 24) \
+ |(MUX_ACLK_160_SEL << 20) \
+ |(MUX_ACLK_100_SEL << 16) \
+ |(MUX_ACLK_200_SEL << 12) \
+ |(MUX_VPLL_SEL << 8) \
+ |(MUX_EPLL_SEL << 4))
+
+/* CLK_SRC_TOP1 */
+#define VPLLSRC_SEL 0x0 /* 0 = FINPLL, 1 = SCLKHDMI27M */
+#define CLK_SRC_TOP1_VAL (0x01111000)
+
+/* CLK_DIV_TOP */
+#define ACLK_400_MCUISP_RATIO 0x1
+#define ACLK_266_GPS_RATIO 0x2
+#define ONENAND_RATIO 0x1
+#define ACLK_133_RATIO 0x5
+#define ACLK_160_RATIO 0x4
+#define ACLK_100_RATIO 0x7
+#define ACLK_200_RATIO 0x4
+#define CLK_DIV_TOP_VAL ((ACLK_400_MCUISP_RATIO << 24) \
+ |(ACLK_266_GPS_RATIO << 20) \
+ |(ONENAND_RATIO << 16) \
+ |(ACLK_133_RATIO << 12) \
+ |(ACLK_160_RATIO << 8) \
+ |(ACLK_100_RATIO << 4) \
+ |(ACLK_200_RATIO))
+
+/* CLK_SRC_LEFTBUS */
+#define CLK_SRC_LEFTBUS_VAL (0x10)
+
+/* CLK_DIV_LEFRBUS */
+#define GPL_RATIO 0x1
+#define GDL_RATIO 0x3
+#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4)|(GDL_RATIO))
+
+/* CLK_SRC_RIGHTBUS */
+#define CLK_SRC_RIGHTBUS_VAL (0x10)
+
+/* CLK_DIV_RIGHTBUS */
+#define GPR_RATIO 0x1
+#define GDR_RATIO 0x3
+#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4)|(GDR_RATIO))
+
+/* CLK_SRC_DMC */
+#define MUX_PWI_SEL 0x1
+#define MUX_CORE_TIMERS_SEL 0x1
+#define MUX_DPHY_SEL 0x0
+#define MUX_DMC_BUS_SEL 0x0
+#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL << 16) \
+ |(MUX_CORE_TIMERS_SEL << 12) \
+ |(MUX_DPHY_SEL << 8) \
+ |(MUX_DMC_BUS_SEL << 4))
+
+/* CLK_DIV_DMC0 */
+#define CORE_TIMERS_RATIO 0x0
+#define COPY2_RATIO 0x0
+#define DMCP_RATIO 0x1
+#define DMCD_RATIO 0x1
+#if (CONFIG_CLK_MPLL == 200)
+#define DMC_RATIO 0x3
+#else
+#define DMC_RATIO 0x1
+#endif
+#define DPHY_RATIO 0x1
+#define ACP_PCLK_RATIO 0x1
+#define ACP_RATIO 0x3
+
+#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \
+ |(COPY2_RATIO << 24) \
+ |(DMCP_RATIO << 20) \
+ |(DMCD_RATIO << 16) \
+ |(DMC_RATIO << 12) \
+ |(DPHY_RATIO << 8) \
+ |(ACP_PCLK_RATIO << 4) \
+ |(ACP_RATIO))
+
+#define CLK_DIV_DMC1_VAL (0x07071713)
+
+/* CLK_SRC_PERIL0 */
+#define UART4_SEL 1
+#define UART3_SEL 1
+#define UART2_SEL 1
+#define UART1_SEL 1
+#define UART0_SEL 1
+#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \
+ |(UART3_SEL << 12) \
+ |(UART2_SEL<< 8) \
+ |(UART1_SEL << 4) \
+ |(UART0_SEL))
+
+/* CLK_DIV_PERIL0 */
+#define UART4_RATIO 3
+#define UART3_RATIO 3
+#define UART2_RATIO 3
+#define UART1_RATIO 3
+#define UART0_RATIO 3
+#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \
+ |(UART3_RATIO << 12) \
+ |(UART2_RATIO << 8) \
+ |(UART1_RATIO << 4) \
+ |(UART0_RATIO))
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP 0x00000BAD
+#define S5P_CHECK_DIDLE 0xBAD00000
+#define S5P_CHECK_LPA 0xABAD0000
+
+/* TZPC */
+#define TZPC_BASE 0x10110000
+#define TZPC_OFFSET 0x10000
+#define TZPC0_BASE (TZPC_BASE)
+#define TZPC1_BASE (TZPC0_BASE + TZPC_OFFSET)
+#define TZPC2_BASE (TZPC1_BASE + TZPC_OFFSET)
+#define TZPC3_BASE (TZPC2_BASE + TZPC_OFFSET)
+#define TZPC4_BASE (TZPC3_BASE + TZPC_OFFSET)
+#define TZPC5_BASE (TZPC4_BASE + TZPC_OFFSET)
+#define TZPC_DECPROT0SET_OFFSET 0x804
+#define TZPC_DECPROT1SET_OFFSET 0x810
+#define TZPC_DECPROT2SET_OFFSET 0x81C
+#define TZPC_DECPROT3SET_OFFSET 0x828
+
+/* IMAGE SIZE (BYTE) */
+#define MBR_BYTE_COUNT CONFIG_MBR_SIZE
+#define SBL_BYTE_COUNT CONFIG_SBL_SIZE
+#define BL1_BYTE_COUNT CONFIG_BL1_SIZE
+#define BL2_BYTE_COUNT CONFIG_BL2_SIZE
+#define ENV_BYTE_COUNT CONFIG_ENV_SIZE
+
+/* IMAGE OFFSET (BYTE) */
+#define MBR_BYTE_OFFSET (0)
+#define SBL_BYTE_OFFSET (MBR_BYTE_OFFSET +
MBR_BYTE_COUNT)
+#define BL1_BYTE_OFFSET (SBL_BYTE_OFFSET +
SBL_BYTE_COUNT)
+#define BL2_BYTE_OFFSET (BL1_BYTE_OFFSET +
BL1_BYTE_COUNT)
+#define ENV_BYTE_OFFSET (Bl2_BYTE_OFFSET +
BL2_BYTE_COUNT)
+
+#define SDMMC_BLK_SIZE (512)
+
+/* IMAGE SIZE (BLOCK) */
+#define SBL_BLK_COUNT (SBL_BYTE_COUNT /
SDMMC_BLK_SIZE)
+#define BL1_BLK_COUNT (BL1_BYTE_COUNT /
SDMMC_BLK_SIZE)
+#define BL2_BLK_COUNT (BL2_BYTE_COUNT /
SDMMC_BLK_SIZE)
+#define ENV_BLK_COUNT (ENV_BYTE_COUNT /
SDMMC_BLK_SIZE)
+
+/* IMAGE OFFSET (BLOCK) */
+#define SBL_BLK_OFFSET (SBL_BYTE_OFFSET /
SDMMC_BLK_SIZE)
+#define BL1_BLK_OFFSET (BL1_BYTE_OFFSET /
SDMMC_BLK_SIZE)
+#define BL2_BLK_OFFSET (BL2_BYTE_OFFSET /
SDMMC_BLK_SIZE)
+#define ENV_BLK_OFFSET (ENV_BYTE_OFFSET /
SDMMC_BLK_SIZE)
+
+/* UART */
+#if defined(CONFIG_SERIAL0)
+#define PERIPH_ID_UART PERIPH_ID_UART0
+#elif defined(CONFIG_SERIAL1)
+#define PERIPH_ID_UART PERIPH_ID_UART1
+#elif defined(CONFIG_SERIAL2)
+#define PERIPH_ID_UART PERIPH_ID_UART2
+#elif defined(CONFIG_SERIAL3)
+#define PERIPH_ID_UART PERIPH_ID_UART3
+#endif
+
+#ifndef __ASSEMBLY__
+void sdelay(unsigned long);
+void clock_ctrl_init(void);
+void mem_ctrl_init(void);
+void tzpc_init(void);
+#endif
+
+#endif /* __SETUP_ORIGEN_QUAD_H */
diff --git a/boards.cfg b/boards.cfg
index d2ccb41..492d503 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -264,6 +264,7 @@ s5pc210_universal arm armv7
universal_c210 samsung
smdk5250 arm armv7 smdk5250
samsung exynos
smdkv310 arm armv7 smdkv310
samsung exynos
trats arm armv7 trats
samsung exynos
+origen_quad arm armv7 origen_quad
insignal exynos
harmony arm armv7 harmony
nvidia tegra2
seaboard arm armv7 seaboard
nvidia tegra2
ventana arm armv7 ventana
nvidia tegra2
diff --git a/include/configs/origen_quad.h b/include/configs/origen_quad.h
new file mode 100644
index 0000000..7e39ee1
--- /dev/null
+++ b/include/configs/origen_quad.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Copyright (C) 2012 Insignal
+ *
+ * Configuration settings for the Insignal OrigenQUAD board (Exynos4x12)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_ORIGEN_QUAD_H
+#define __CONFIG_ORIGEN_QUAD_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_SAMSUNG /* in a SAMSUNG core */
+#define CONFIG_S5P /* S5P Family */
+#define CONFIG_EXYNOS4 /* which is in a Exynos4 series */
+#define CONFIG_EXYNOS4412 /* which is in a Exynos4412 */
+#define CONFIG_ORIGEN_QUAD /* which is in a ORIGEN QUAD */
+#define CONFIG_BOARDNAME "Origen"
+#define CONFIG_IDENT_STRING " for Insignal Origen"
+#define CONFIG_MACH_TYPE 3455
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+/*
+ * Clock / PLL
+ */
+#define CONFIG_SYS_CLK_FREQ 24000000 /* 24MHz input clock */
+#define CONFIG_CLK_APLL 1000
+#define CONFIG_CLK_MPLL 400
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_PWM
+
+/*
+ * Memory
+ */
+/* Default address */
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_TEXT_BASE 0x43E00000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR -
GENERATED_GBL_DATA_SIZE)
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1 << 20UL)
+/* Cache */
+#define CONFIG_SYS_DCACHE_OFF /* Keep L2 Cache Disabled */
+/* DRAM */
+#define CONFIG_NR_DRAM_BANKS 4 /* 256 MB * 4 = 1 GB */
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2 (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
+#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3 (PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE)
+#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4 (PHYS_SDRAM_3 + PHYS_SDRAM_3_SIZE)
+#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
+/* Reserved */
+#define CONFIG_RESERVED_DRAM 0x100000
+/* Mem test */
+#define CONFIG_CMD_MEMORY
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_4 + PHYS_SDRAM_4_SIZE -
(8UL << 20UL))
+
+/*
+ * Serial
+ */
+#define CONFIG_SERIAL2 2 /* use SERIAL2 in 0~3 */
+#define CONFIG_SERIAL_MULTI 1
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * PMIC
+ */
+#define CONFIG_PMIC 1
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_S5P_SDHCI
+#define CONFIG_CMD_MMC
+
+/*
+ * File System
+ */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+/*
+ * Flash
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Image map on sdmmc/emmc
+ */
+#define CONFIG_SECURE_BL1_ONLY
+#define CONFIG_SPL
+#define CONFIG_MBR_SIZE (512)
+#define CONFIG_SBL_SIZE (8UL << 10) /* 8KB */
+#define CONFIG_BL1_SIZE (16UL << 10) /* 16KB */
+#define CONFIG_BL2_SIZE (512UL << 10) /* 512KB */
+
+/*
+ * Console
+ */
+#define CONFIG_SYS_PROMPT CONFIG_BOARDNAME " # "
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE 384
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+
+/*
+ * Commands
+ */
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_OFFSET (CONFIG_MBR_SIZE \
+ +CONFIG_SBL_SIZE \
+ +CONFIG_BL1_SIZE \
+ +CONFIG_BL2_SIZE)
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+#define CONFIG_ENV_OVERWRITE
+/* Default */
+#define CONFIG_BOOTCOMMAND "fatload mmc 0 40008000 uImage; bootm
40008000"
+
+/*
+ * Misc
+ */
+/* Initialize */
+#define CONFIG_ARCH_CPU_INIT 1
+#define CONFIG_BOARD_EARLY_INIT_F 1
+/* display information */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+/* Delay */
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+/* TAGS */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#endif /* __CONFIG_ORIGEN_QUAD_H */
diff --git a/tools/Makefile b/tools/Makefile
index a478179..1753a45 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -68,6 +68,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX)
BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX)
BIN_FILES-y += mkenvimage$(SFX)
BIN_FILES-y += mkimage$(SFX)
+BIN_FILES-$(CONFIG_EXYNOS4) += mkexynosspl$(SFX)
BIN_FILES-$(CONFIG_EXYNOS5) += mkexynosspl$(SFX)
BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX)
BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX)
@@ -96,6 +97,7 @@ NOPED_OBJ_FILES-y += imximage.o
NOPED_OBJ_FILES-y += omapimage.o
NOPED_OBJ_FILES-y += mkenvimage.o
NOPED_OBJ_FILES-y += mkimage.o
+OBJ_FILES-$(CONFIG_EXYNOS4) += mkexynosspl.o
OBJ_FILES-$(CONFIG_EXYNOS5) += mkexynosspl.o
OBJ_FILES-$(CONFIG_MX28) += mxsboot.o
OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
