From: Jens Scharsig <[email protected]> * add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config)
Signed-off-by: Jens Scharsig <[email protected]> Signed-off-by: Jens Scharsig (BuS Elektronik) <[email protected]> --- fix code styling boards.cfg | 3 ++- include/configs/eb_cpux9k2.h | 7 ++++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/boards.cfg b/boards.cfg index 72e7803..613d6b2 100644 --- a/boards.cfg +++ b/boards.cfg @@ -60,7 +60,8 @@ integratorcp_cm920t arm arm920t integrator armltd a320evb arm arm920t - faraday a320 at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT -eb_cpux9k2 arm arm920t - BuS at91 +eb_cpux9k2 arm arm920t eb_cpux9k2 BuS at91 eb_cpux9k2 +eb_cpux9k2_ram arm arm920t eb_cpux9k2 BuS at91 eb_cpux9k2:RAMBOOT cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91 cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT mx1ads arm arm920t - - imx diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index d4104de..9371ec3 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -44,7 +44,12 @@ #define MACH_TYPE_EB_CPUX9K2 1977 #define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 /*--------------------------------------------------------------------------*/ -#define CONFIG_SYS_TEXT_BASE 0x00000000 +#ifndef CONFIG_RAMBOOT +#define CONFIG_SYS_TEXT_BASE 0x00000000 +#else +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x21f00000 +#endif #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ #define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ -- 1.7.3.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
