Dear Lucas Stach, Patchset doesn't apply ... rebase and repost please.
> V4: Fixed build failures in fsl and mxs ehci code. Also rebased on > the latest usb/master and did MAKEALL -a powerpc in addition to > MAKEALL -a arm. > > V3: Stephen ran into some problems applying this, as it seems my tree > wasn't as clean as it should have been. Sorry for the inconvenience. > This should now be fixed. > > Hi all, > > this is a follow up on the patch "USB: EHCI: Initialize multiple > USB controllers at once" from Jim Lin. It takes some of the > code but has undergone some heavy reworking. > > When we remove the ifdef horror from the above mentioned patch it's > mostly a big interface change to the usb subsystem. As this creates > a lot of churn I've split this up into a series. Every patch is self > contained so it doesn't break compiles and *should* not regress > any functionality on it's own. At least the series is bisectable in > case anything goes wrong. I've compile tested all the ARM configs. > > Both the lowlevel usb and ehci interface change are backward > compatible, so implementations that only use one controller can > choose to ignore the new interface. All implementations are > updated to work with the new function prototypes. > > For Tegra I've included a patch to actually use the new ehci > interface. Tom, Stephen, can I get an ACK from you for this, so > Marek can take this through his USB tree? > > All patches now rebased onto u-boot-usb/master. > > Patch 3 also includes some cosmetic changes, to make the output > of the usb commands more readable. > > On my Colibri T20, with a total of 3 usb controllers of which 2 > are enabled in the device tree, output now looks like this: > > Tegra20 (Colibri) # usb start > (Re)start USB... > USB0: USB EHCI 1.00 > scanning bus 0 for devices... 2 USB Device(s) found > USB1: USB EHCI 1.00 > scanning bus 1 for devices... 2 USB Device(s) found > USB2: lowlevel init failed > scanning usb for storage devices... 1 Storage Device(s) found > scanning usb for ethernet devices... 1 Ethernet Device(s) found > > Tegra20 (Colibri) # usb tree > USB device tree: > 1 Hub (480 Mb/s, 0mA) > > | u-boot EHCI Host Controller > > +-2 Mass Storage (480 Mb/s, 200mA) > SanDisk U3 Titanium 2845221DC342AE8F > > 3 Hub (480 Mb/s, 0mA) > > | u-boot EHCI Host Controller > > +-4 Vendor specific (480 Mb/s, 4mA) > ASIX Elec. Corp. AX88772B 000001 > > Lucas Stach (4): > usb: lowlevel interface change to support multiple controllers > usb: ehci: rework to take advantage of new lowlevel interface > usb: add support for multiple usb controllers > tegra20: port to new ehci interface > > arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c | 4 +- > arch/arm/cpu/armv7/tegra20/usb.c | 15 +--- > arch/arm/include/asm/arch-tegra20/usb.h | 4 +- > arch/arm/include/asm/ehci-omap.h | 10 ++- > arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.c | 4 +- > arch/powerpc/cpu/mpc5xxx/usb_ohci.c | 4 +- > arch/powerpc/cpu/ppc4xx/usb_ohci.c | 4 +- > arch/sparc/cpu/leon3/usb_uhci.c | 4 +- > arch/sparc/lib/bootm.c | 2 +- > board/htkw/mcx/mcx.c | 6 +- > board/mpl/common/usb_uhci.c | 4 +- > board/technexion/twister/twister.c | 6 +- > board/teejet/mt_ventoux/mt_ventoux.c | 6 +- > board/ti/beagle/beagle.c | 6 +- > board/ti/panda/panda.c | 6 +- > common/cmd_usb.c | 16 +++- > common/usb.c | 108 +++++++++++----------- > common/usb_hub.c | 2 +- > common/usb_storage.c | 2 +- > drivers/usb/eth/usb_ether.c | 2 +- > drivers/usb/host/ehci-armada100.c | 15 ++-- > drivers/usb/host/ehci-atmel.c | 11 ++- > drivers/usb/host/ehci-core.h | 29 ------ > drivers/usb/host/ehci-exynos.c | 15 ++-- > drivers/usb/host/ehci-fsl.c | 15 ++-- > drivers/usb/host/ehci-hcd.c | 124 > ++++++++++++++------------ drivers/usb/host/ehci-ixp4xx.c | > 15 ++-- > drivers/usb/host/ehci-marvell.c | 15 ++-- > drivers/usb/host/ehci-mpc512x.c | 25 ++---- > drivers/usb/host/ehci-mx5.c | 11 ++- > drivers/usb/host/ehci-mx6.c | 11 ++- > drivers/usb/host/ehci-mxc.c | 11 ++- > drivers/usb/host/ehci-mxs.c | 20 +++-- > drivers/usb/host/ehci-omap.c | 10 ++- > drivers/usb/host/ehci-pci.c | 15 ++-- > drivers/usb/host/ehci-ppc4xx.c | 11 ++- > drivers/usb/host/ehci-tegra.c | 14 ++- > drivers/usb/host/ehci-vct.c | 9 +- > drivers/usb/host/ehci.h | 4 +- > drivers/usb/host/isp116x-hcd.c | 4 +- > drivers/usb/host/ohci-hcd.c | 4 +- > drivers/usb/host/r8a66597-hcd.c | 4 +- > drivers/usb/host/sl811-hcd.c | 4 +- > drivers/usb/musb/musb_hcd.c | 4 +- > include/usb.h | 10 ++- > include/usb/mv_udc.h | 2 +- > 46 Dateien geändert, 309 Zeilen hinzugefügt(+), 318 Zeilen entfernt(-) > delete mode 100644 drivers/usb/host/ehci-core.h Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
