> Without usb-serial cable plugged at this stage, some garbage is seen in UART > RX FIFO, which blocks autoboot progress. The fix makes sure to empty the RX > FIFO, before we wait for user input to interrupt autoboot. > > Signed-off-by: Ramesh Chandrasekaran > <[email protected]> > --- > board/st-ericsson/snowball/snowball.c | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/board/st-ericsson/snowball/snowball.c b/board/st- > ericsson/snowball/snowball.c > index 8c743c0..e750df1 100644 > --- a/board/st-ericsson/snowball/snowball.c > +++ b/board/st-ericsson/snowball/snowball.c > @@ -253,6 +253,10 @@ int board_late_init(void) > if ((raise_ab8500_gpio16() < 0)) > printf("error: cant' raise GPIO16\n"); > > + /* empty UART RX FIFO */ > + while (tstc()) > + (void) getc(); > + > return 0; > } > > -- Hi Albert Aribaud,
Is the above patch going in for the release ? Not got any review comments until now from the community. Or please point me to the right person. Ramesh _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
