This prints a tftp speed indication after the download completes. This
is the 3.6 MiB/s indicator below.
Tegra2 (SeaBoard) # tftp ...
Using asx0 device
TFTP from server 172.22.72.144; our IP address is 172.22.73.81
Filename '/tftpboot/uImage-user-seaboard-1'.
Load address: 0x408000
Loading: #################################################
3.6 MiB/s
done
Signed-off-by: Simon Glass <[email protected]>
---
Changes in v2:
- Make this feature unconditional (remove need for CONFIG_TFTP_SPEED)
- Display speed on the next line instead of same line
net/tftp.c | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/net/tftp.c b/net/tftp.c
index 59a8ebb..09790eb 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -40,6 +40,7 @@
static ulong TftpTimeoutMSecs = TIMEOUT;
static int TftpTimeoutCountMax = TIMEOUT_COUNT;
+static ulong time_start; /* Record time we started tftp */
/*
* These globals govern the timeout behavior when attempting a connection to a
@@ -299,6 +300,12 @@ static void tftp_complete(void)
TftpNumchars++;
}
#endif
+ time_start = get_timer(time_start);
+ if (time_start > 0) {
+ puts("\n\t "); /* Line up with "Loading: " */
+ print_size(NetBootFileXferSize /
+ time_start * 1000, "/s");
+ }
puts("\ndone\n");
net_set_state(NETLOOP_SUCCESS);
}
@@ -775,6 +782,7 @@ void TftpStart(enum proto_t protocol)
TftpState = STATE_SEND_RRQ;
}
+ time_start = get_timer(0);
TftpTimeoutCountMax = TftpRRQTimeoutCountMax;
NetSetTimeout(TftpTimeoutMSecs, TftpTimeout);
--
1.7.7.3
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
