On Wed, Oct 24, 2012 at 04:23:02PM -0400, Andrew Bradford wrote:
> Add targets of am335x_evm_uart{1,2,3,4,5} to have serial input/output on
> UART{1,2,3,4,5} for use with the Beaglebone RS232 cape, am335x_evm
> daughterboard, and other custom configurations.
>
> Signed-off-by: Andrew Bradford <[email protected]>
> ---
> Changes from v2:
> Set CONS_INDEX and SERIALX in the target options instead of
> using AM33XX_UART_SELECT resulting in an easier to read config.
> Changes from v1:
> Add UART3 target and register location
>
> boards.cfg | 5 +++++
> include/configs/am335x_evm.h | 12 +++++++++++-
> 2 files changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/boards.cfg b/boards.cfg
> index b14a08f..0024033 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -226,6 +226,11 @@ integratorap_cm946es arm arm946es
> integrator armltd
> integratorcp_cm946es arm arm946es integrator
> armltd - integratorcp:CM946ES
> ca9x4_ct_vxp arm armv7 vexpress
> armltd
> am335x_evm arm armv7 am335x ti
> am33xx
> +am335x_evm_uart1 arm armv7 am335x ti
> am33xx am335x_evm:SERIAL2=1,CONS_INDEX=2This could just be am335x_evm:SERIAL2,CONS_INDEX=2 right? We don't check the value of CONFIG_SERIAL2 (or 3 or ..) just tha it's set, correct? [snip] > /* > - * select serial console configuration > + * select serial console configuration, uart0 always enabled > */ > #define CONFIG_SERIAL1 1 > +#ifndef CONFIG_CONS_INDEX > #define CONFIG_CONS_INDEX 1 > +#endif /* CONFIG_CONS_INDEX */ Just amke CONS_INDEX=1 be the default in boards.cfg. Makes it clear all around when folks add new config targets they must set that. -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
