On Mon, Nov 5, 2012 at 10:54 AM, Shimoda, Yoshihiro <[email protected]> wrote: > SH7752 has two fast ethernet controllers and two gigabit ethernet > controllers. It is similar to SH7757. > > Signed-off-by: Yoshihiro Shimoda <[email protected]>
Acked-by: Nobuhiro Iwamatsu <[email protected]> > --- > drivers/net/sh_eth.c | 4 ++-- > drivers/net/sh_eth.h | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c > index 2d9cc32..e6fc8c8 100644 > --- a/drivers/net/sh_eth.c > +++ b/drivers/net/sh_eth.c > @@ -417,7 +417,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) > printf(SHETHER_NAME ": 100Base/"); > #if defined(SH_ETH_TYPE_GETHER) > sh_eth_write(eth, GECMR_100B, GECMR); > -#elif defined(CONFIG_CPU_SH7757) > +#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) > sh_eth_write(eth, 1, RTRATE); > #elif defined(CONFIG_CPU_SH7724) > val = ECMR_RTM; > @@ -426,7 +426,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) > printf(SHETHER_NAME ": 10Base/"); > #if defined(SH_ETH_TYPE_GETHER) > sh_eth_write(eth, GECMR_10B, GECMR); > -#elif defined(CONFIG_CPU_SH7757) > +#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) > sh_eth_write(eth, 0, RTRATE); > #endif > } > diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h > index 61d2df9..568fafe 100644 > --- a/drivers/net/sh_eth.h > +++ b/drivers/net/sh_eth.h > @@ -288,7 +288,7 @@ static const u16 > sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { > #if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734) > #define SH_ETH_TYPE_GETHER > #define BASE_IO_ADDR 0xfee00000 > -#elif defined(CONFIG_CPU_SH7757) > +#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) > #if defined(CONFIG_SH_ETHER_USE_GETHER) > #define SH_ETH_TYPE_GETHER > #define BASE_IO_ADDR 0xfee00000 > @@ -346,7 +346,7 @@ enum DMAC_T_BIT { > > /* GECMR */ > enum GECMR_BIT { > -#if defined(CONFIG_CPU_SH7757) > +#if defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) > GECMR_1000B = 0x20, GECMR_100B = 0x01, GECMR_10B = 0x00, > #else > GECMR_1000B = 0x01, GECMR_100B = 0x04, GECMR_10B = 0x00, > -- > 1.7.1 Best regards, Nobuhiro -- Nobuhiro Iwamatsu iwamatsu at {nigauri.org / debian.org} GPG ID: 40AD1FA6 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
