On 16/11/2012 17:46, Benoît Thébaudeau wrote: > The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance > selection bit. > > This issue has been reported by Eric Bénard <[email protected]> and fixed by > Christoph Fritz <[email protected]> on Linux, from which these > #define-s > had been copied. > > Signed-off-by: Benoît Thébaudeau <[email protected]> > Cc: Stefano Babic <[email protected]> > Cc: Marek Vasut <[email protected]> > --- > .../drivers/usb/host/ehci-mxc.c | 2 > +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c > u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c > index 7c5f71c..352ad86 100644 > --- u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c > +++ u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c > @@ -37,7 +37,7 @@ > #define MX25_H1_SIC_SHIFT 21 > #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) > #define MX25_H1_PP_BIT (1 << 18) > -#define MX25_H1_PM_BIT (1 << 8) > +#define MX25_H1_PM_BIT (1 << 16) > #define MX25_H1_IPPUE_UP_BIT (1 << 7) > #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) > #define MX25_H1_TLL_BIT (1 << 5) >
Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
