Add static struct eth_ops and set ops function pointers statically.
Remove setting eth_ops members dynamically.

This is a step toward converting the driver for DM.

Signed-off-by: Tomas Hlavacek <tmshl...@gmail.com>
---
 drivers/net/ax88180.c |   13 +++++++++----
 1 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c
index 464f261..fc237ba 100644
--- a/drivers/net/ax88180.c
+++ b/drivers/net/ax88180.c
@@ -698,6 +698,14 @@ static void ax88180_read_mac_addr (struct eth_device *dev)
        }
 }
 
+static struct eth_ops ax88180_ops = {
+       .init = ax88180_init,
+       .halt = ax88180_halt,
+       .send = ax88180_send,
+       .recv = ax88180_recv
+};
+
+
 /*
 ===========================================================================
 <<<<<<                 Exported SubProgram Bodies              >>>>>>
@@ -725,10 +733,7 @@ int ax88180_initialize (bd_t * bis)
        sprintf (dev->name, "ax88180");
        dev->iobase = AX88180_BASE;
        dev->priv = priv;
-       dev->eo->init = ax88180_init;
-       dev->eo->halt = ax88180_halt;
-       dev->eo->send = ax88180_send;
-       dev->eo->recv = ax88180_recv;
+       dev->eo = &ax88180_ops;
 
        priv->BusWidth = BUS_WIDTH_32;
        priv->PadSize = 3;
-- 
1.7.2.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to