u-boot  

Messages by Thread

• • Re: [PATCH] dm: Respect dma-ranges size Tom Rini
• Re: [PATCH 3/3] armv7: ls102xa: fix SPI flash clock Michael Walle
• [PATCH v2 0/4] i.MX8MP: Convert to DM_PMIC for a few boards Peng Fan (OSS)
  • [PATCH v2 1/4] imx8mp: phyboard-pollux-rdk: Convert to DM_PMIC Peng Fan (OSS)
  • Re: [PATCH v2 1/4] imx8mp: phyboard-pollux-rdk: Convert to DM_PMIC Yannic Moog
  • Re: [PATCH v2 1/4] imx8mp: phyboard-pollux-rdk: Convert to DM_PMIC Teresa Remmet
  • [PATCH v2 3/4] imx8mp: libra-fpsc: Convert to DM_PMIC Peng Fan (OSS)
  • Re: [PATCH v2 3/4] imx8mp: libra-fpsc: Convert to DM_PMIC Yannic Moog
  • Re: [PATCH v2 3/4] imx8mp: libra-fpsc: Convert to DM_PMIC Teresa Remmet
  • [PATCH v2 2/4] imx8mp: verdin: Convert to DM_PMIC Peng Fan (OSS)
  • Re: [PATCH v2 2/4] imx8mp: verdin: Convert to DM_PMIC Ernest Van Hoecke
  • [PATCH v2 4/4] imx8mp: icore-edimm2.2: Convert to DM_PMIC Peng Fan (OSS)
• RE: [PATCH] rtl8169: add support for RTL8125d Javen
  • Re: [PATCH] rtl8169: add support for RTL8125d Jerome Forissier
• [PATCH 0/2] imx95-toradex-smarc: Migrate to OF_UPSTREAM and enable GPIO_HOG Franz Schnyder
  • [PATCH 2/2] configs: toradex-smarc-imx95: Add gpio-hog support Franz Schnyder
  • [PATCH 1/2] arm: dts: imx95-toradex-smarc: migrate to OF_UPSTREAM Franz Schnyder
  • Re: [PATCH 0/2] imx95-toradex-smarc: Migrate to OF_UPSTREAM and enable GPIO_HOG Francesco Dolcini
• Re: [PATCH 1/4] imx8mp: phyboard-pollux-rdk: Convert to DM_PMIC Peng Fan
  • Re: [PATCH 1/4] imx8mp: phyboard-pollux-rdk: Convert to DM_PMIC Frieder Schrempf
  • RE: [PATCH 1/4] imx8mp: phyboard-pollux-rdk: Convert to DM_PMIC Peng Fan
• [PATCH] arm64: renesas: Add Cortex-M33 build option to R-Car Gen5 Marek Vasut
  • Re: [PATCH] arm64: renesas: Add Cortex-M33 build option to R-Car Gen5 Quentin Schulz
  • Re: [PATCH] arm64: renesas: Add Cortex-M33 build option to R-Car Gen5 Marek Vasut
• [PATCH] arm: relocate: Make data-only relocation mode non-user-configurable Marek Vasut
  • Re: [PATCH] arm: relocate: Make data-only relocation mode non-user-configurable Tom Rini
• [PATCH v2] arm: Add ARMv8-M aarch32 support Marek Vasut
  • Re: [PATCH v2] arm: Add ARMv8-M aarch32 support Kumar, Udit
  • Re: [PATCH v2] arm: Add ARMv8-M aarch32 support Marek Vasut
  • Re: [PATCH v2] arm: Add ARMv8-M aarch32 support Tom Rini
  • Re: [PATCH v2] arm: Add ARMv8-M aarch32 support Marek Vasut
  • Re: [PATCH v2] arm: Add ARMv8-M aarch32 support Tom Rini
• [PATCH] ufs: core: Fix heap corruption due to out of bounds write Marek Vasut
  • Re: [PATCH] ufs: core: Fix heap corruption due to out of bounds write Neil Armstrong
  • Re: [PATCH] ufs: core: Fix heap corruption due to out of bounds write Marek Vasut
  • Re: [PATCH] ufs: core: Fix heap corruption due to out of bounds write Marek Vasut
  • Re: [PATCH] ufs: core: Fix heap corruption due to out of bounds write Neil Armstrong
• [PATCH] boot/bootm: Disable interrupts after loading the image J . Neuschäfer via B4 Relay
  • Re: boot/bootm: Disable interrupts after loading the image Simon Glass
• [PATCH] powerpc/mpc83xx: Move alignment padding into __u_boot_list section J . Neuschäfer via B4 Relay
  • Re: [PATCH] powerpc/mpc83xx: Move alignment padding into __u_boot_list section Tom Rini
  • Re: [PATCH] powerpc/mpc83xx: Move alignment padding into __u_boot_list section Tom Rini
• U-Boot HDMI console on rk3399 Tamás Szabó
  • Re: U-Boot HDMI console on rk3399 Peter Robinson
• Re: [PATCH v3] binman: add CST backend selection for i.MX8M signing Simon Glass
  • Re: [PATCH v3] binman: add CST backend selection for i.MX8M signing Marek Vasut
  • Re: [PATCH v3] binman: add CST backend selection for i.MX8M signing Simon Glass
• [PATCH 0/4] Support metadata-driven A/B boot for STM32MP25 Dario Binacchi
  • [PATCH 1/4] lib: uuid: add partition type GUID for extended bootloader Dario Binacchi
  • Re: [PATCH 1/4] lib: uuid: add partition type GUID for extended bootloader Heinrich Schuchardt
  • Re: [PATCH 1/4] lib: uuid: add partition type GUID for extended bootloader Simon Glass
  • [PATCH 3/4] fwu: add helper to get image GUID by type and bank index Dario Binacchi
  • Re: [3/4] fwu: add helper to get image GUID by type and bank index Simon Glass
  • [PATCH 4/4] board: st: stm32mp25: support dynamic A/B bank bootup Dario Binacchi
  • [PATCH 2/4] cmd: part: support lookup by UUID in 'part number' Dario Binacchi
  • Re: [2/4] cmd: part: support lookup by UUID in 'part number' Simon Glass
• [PATCH 1/3] board: samsung: fix set_board_info() board_name buffer overflow Ngo Luong Thanh Tra
  • [PATCH 2/3] board: toradex: fix tdx-cfg-block prompt buffer overflow Ngo Luong Thanh Tra
  • [PATCH 3/3] common: cli_hush: fix console_buffer overflow on boot retry Ngo Luong Thanh Tra
  • Re: [PATCH 3/3] common: cli_hush: fix console_buffer overflow on boot retry Rasmus Villemoes
  • Re: (subset) [PATCH 1/3] board: samsung: fix set_board_info() board_name buffer overflow Tom Rini
• [PATCH] board: nanopi2: fix bd_update_env() cmdline buffer overflow Ngo Luong Thanh Tra
  • Re: [PATCH] board: nanopi2: fix bd_update_env() cmdline buffer overflow Stefan Bosch
  • Re: [PATCH] board: nanopi2: fix bd_update_env() cmdline buffer overflow Stefan Bosch
  • Re: [PATCH] board: nanopi2: fix bd_update_env() cmdline buffer overflow Tom Rini
• Re: [PATCH] arm: relocate: Introduce data-only relocation mode Tom Rini
  • Re: [PATCH] arm: relocate: Introduce data-only relocation mode Marek Vasut
  • Re: [PATCH] arm: relocate: Introduce data-only relocation mode Tom Rini
  • Re: [PATCH] arm: relocate: Introduce data-only relocation mode Marek Vasut
  • Re: [PATCH] arm: relocate: Introduce data-only relocation mode Marek Vasut
• Re: [PATCH] arm: Drop unused __XSCALE__ section Tom Rini
• Re: [PATCH] arm: Introduce current_pl() on ARM32 and compatibility current_el() Tom Rini
• Re: [RFC PATCH v3] cmd: part: add part dupcheck subcommand Tom Rini
• Re: [PATCH] fs: fat: Refactor dirty flag handling Tom Rini
• Re: [PATCH 1/2] Add back debug output of hashed nodes Tom Rini
• RE: [PATCH] board: dhelectronics: imx: Use second Ethernet MAC also from fuse Christoph Niedermaier
  • Re: [PATCH] board: dhelectronics: imx: Use second Ethernet MAC also from fuse Marek Vasut
  • RE: [PATCH] board: dhelectronics: imx: Use second Ethernet MAC also from fuse Christoph Niedermaier
• Re: [PATCH 0/6] test: Refactor FIT test for clarity and extensibility Tom Rini
• [PATCH v4 1/5] sunxi: h616: make ns_to_t() use the DRAM clock James Hilliard
  • [PATCH v4 4/5] dt-bindings: memory: allwinner: add sunxi DRAM type constants James Hilliard
  • [PATCH v4 5/5] sunxi: h616: support a default DRAM profile from the device tree James Hilliard
  • [PATCH v4 3/5] sunxi: h616: split timing and PHY init helpers by DRAM type James Hilliard
  • [PATCH v4 2/5] sunxi: h616: move PHY init tables into timing files James Hilliard
• [PATCH 0/3] power: pmic: mtk-pwrap: add more capability flags David Lechner
  • [PATCH 2/3] power: pmic: mtk-pwrap: add PWRAP_CAP_WDT_SRC flag David Lechner
  • Re: [PATCH 2/3] power: pmic: mtk-pwrap: add PWRAP_CAP_WDT_SRC flag Julien Stephan
  • Re: [PATCH 2/3] power: pmic: mtk-pwrap: add PWRAP_CAP_WDT_SRC flag 林智斌
  • [PATCH 1/3] power: pmic: mtk-pwrap: add init capability flag David Lechner
  • Re: [PATCH 1/3] power: pmic: mtk-pwrap: add init capability flag Julien Stephan
  • Re: [PATCH 1/3] power: pmic: mtk-pwrap: add init capability flag 林智斌
  • [PATCH 3/3] power: pmic: mtk-pwrap: drop PWRAP_SLV_CAP_DUALIO on mt6359 David Lechner
  • Re: [PATCH 3/3] power: pmic: mtk-pwrap: drop PWRAP_SLV_CAP_DUALIO on mt6359 林智斌
• Re: [PATCH] arm: Add ARMv8-M aarch32 support Tom Rini
  • Re: [PATCH] arm: Add ARMv8-M aarch32 support Marek Vasut
  • Re: [PATCH] arm: Add ARMv8-M aarch32 support Kumar, Udit
  • Re: [PATCH] arm: Add ARMv8-M aarch32 support Marek Vasut
• Re: [PATCH v2] doc: spacemit: add K1 SPL build and test guide Vincent Legoll
• Re: [PATCH v3 00/16] Add board support for Spacemit K1 SoC in SPL Vincent Legoll
  • Re: [PATCH v3 00/16] Add board support for Spacemit K1 SoC in SPL Vincent Legoll
  • Re: [PATCH v3 00/16] Add board support for Spacemit K1 SoC in SPL Raymond Mao
• Re: [PATCH] CI: Update sjg lab to match currently actively boards Tom Rini
  • Re: [PATCH] CI: Update sjg lab to match currently actively boards Simon Glass
  • Re: [PATCH] CI: Update sjg lab to match currently actively boards Tom Rini
  • Re: [PATCH] CI: Update sjg lab to match currently actively boards Simon Glass
• [PATCH v6 0/7] riscv: Add support for P8700 platform on Boston board Uros Stajic
  • [PATCH v6 1/7] riscv: Add initial support for P8700 SoC Uros Stajic
  • Re: [PATCH v6 1/7] riscv: Add initial support for P8700 SoC Yao Zi
  • [PATCH v6 1/7] riscv: Add initial support for P8700 SoC Uros Stajic
  • [PATCH v6 2/7] board: boston-riscv: Add initial support for P8700 Boston board Uros Stajic
  • [PATCH v6 3/7] gpio: Add GPIO driver for Intel EG20T Uros Stajic
  • [PATCH v6 4/7] pci: xilinx: Avoid writing memory base/limit for root bridge Uros Stajic
  • [PATCH v6 5/7] riscv: Add syscon driver for MIPS GIC block Uros Stajic
  • [PATCH v6 6/7] net: pch_gbe: Add PHY reset and MAC address fallback for RISC-V Uros Stajic
  • [PATCH v6 7/7] riscv: p8700: Add Coherence Manager (CM) and IOCU support Uros Stajic
• [PATCH v5 7/8] libfdt: Allow non-64b aligned memreserve entries Uros Stajic
• [PATCH v5 6/8] net: pch_gbe: Add PHY reset and MAC address fallback for RISC-V Uros Stajic
• [PATCH v5 2/8] board: boston-riscv: Add initial support for P8700 Boston board Uros Stajic
• [PATCH v5 1/8] riscv: Add initial support for P8700 SoC Uros Stajic
• Re: [PATCH v2 0/4] add [ as alias for test, fix 0/1 argument handling Franz Schnyder
  • Re: [PATCH v2 0/4] add [ as alias for test, fix 0/1 argument handling Rasmus Villemoes
• [PATCH v2 00/13] sc5xx Environment Cleanup and Fixes Caleb Ethridge
  • [PATCH v2 01/13] configs: sc5xx: Do not store environment in SPI flash Caleb Ethridge
  • [PATCH v2 02/13] mach-sc5xx: Remove update commands from default environment Caleb Ethridge
  • [PATCH v2 03/13] mach-sc5xx: Update boot commands Caleb Ethridge
  • [PATCH v2 04/13] mach-sc5xx: Switch from tftp to wget Caleb Ethridge
  • [PATCH v2 05/13] mach-sc5xx: Add USB boot command Caleb Ethridge
  • [PATCH v2 06/13] mach-sc5xx: Remove preliminary binman support Caleb Ethridge
  • [PATCH v2 07/13] dts: sc594: Fix gige-reset line on EZKIT Caleb Ethridge
  • [PATCH v2 08/13] mach-sc5xx: sc573: Rename EZKIT board to EZLITE Caleb Ethridge
  • [PATCH v2 09/13] mach-sc5xx: Update image load address Caleb Ethridge
  • [PATCH v2 10/13] mach-sc5xx: Update SPI bootargs for ubifs Caleb Ethridge
  • [PATCH v2 11/13] configs: sc5xx: Set default bootcmd to SPI boot Caleb Ethridge
  • [PATCH v2 13/13] arm: sc5xx: add missing boot env selectors Caleb Ethridge
  • [PATCH v2 12/13] arm: sc5xx: remove LOADADDR and use kernel_addr_r Caleb Ethridge
• [GIT PULL] AMD/Xilinx changes for 2026-07-rc1 v2 Michal Simek
  • Re: [GIT PULL] AMD/Xilinx changes for 2026-07-rc1 v2 Tom Rini
• [PATCH] config_distro_bootcmd: do not scan boot partitions if distro_bootpart is defined Hugo Villeneuve
  • Re: [PATCH] config_distro_bootcmd: do not scan boot partitions if distro_bootpart is defined Tom Rini
• Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Marko Mäkelä
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Robert Nelson
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Marko Mäkelä
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Marko Mäkelä
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Robert Nelson
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Marko Mäkelä
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Robert Nelson
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Marko Mäkelä
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Robert Nelson
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Marko Mäkelä
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Robert Nelson
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Marko Mäkelä
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Randolph Sapp
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Robert Nelson
  • Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support Randolph Sapp
• [PATCH v2 0/5] mtd: rawnand: sunxi: Fix user data length for H6 Richard Genoud
  • [PATCH v2 1/5] mtd: rawnand: sunxi: Replace hard coded value by a define Richard Genoud
  • Re: [PATCH v2 1/5] mtd: rawnand: sunxi: Replace hard coded value by a define Andre Przywara
  • [PATCH v2 2/5] mtd: rawnand: sunxi: make the code mode self-explanatory Richard Genoud
  • Re: [PATCH v2 2/5] mtd: rawnand: sunxi: make the code mode self-explanatory Michael Nazzareno Trimarchi
  • Re: [PATCH v2 2/5] mtd: rawnand: sunxi: make the code mode self-explanatory Andre Przywara
  • [PATCH v2 3/5] mtd: rawnand: sunxi: clean sunxi_nand_chip_init() Richard Genoud
  • Re: [PATCH v2 3/5] mtd: rawnand: sunxi: clean sunxi_nand_chip_init() Michael Nazzareno Trimarchi
  • Re: [PATCH v2 3/5] mtd: rawnand: sunxi: clean sunxi_nand_chip_init() Andre Przywara
  • [PATCH v2 4/5] mtd: rawnand: sunxi: introduce variable user data length Richard Genoud
  • [PATCH v2 5/5] mtd: nand: raw: sunxi_spl: remove user data length reset Richard Genoud
  • Re: [PATCH v2 0/5] mtd: rawnand: sunxi: Fix user data length for H6 Andre Przywara
  • Re: [PATCH v2 0/5] mtd: rawnand: sunxi: Fix user data length for H6 Michael Nazzareno Trimarchi
  • Re: [PATCH v2 0/5] mtd: rawnand: sunxi: Fix user data length for H6 Andre Przywara
  • Re: [PATCH v2 0/5] mtd: rawnand: sunxi: Fix user data length for H6 Michael Nazzareno Trimarchi
• [PATCH] virtio: add support for SIZE_MAX & SEG_MAX features Christian Pötzsch
  • Re: [PATCH] virtio: add support for SIZE_MAX & SEG_MAX features Simon Glass
  • Re: [PATCH] virtio: add support for SIZE_MAX & SEG_MAX features Tom Rini
  • Re: [PATCH] virtio: add support for SIZE_MAX & SEG_MAX features Christian Pötzsch
  • [PATCH v2] virtio: add support for SIZE_MAX & SEG_MAX features Christian Pötzsch
  • Re: [PATCH v2] virtio: add support for SIZE_MAX & SEG_MAX features Tom Rini
• [PATCH 0/4] Add TPM2 support for AMD Versal Gen 2 Padmarao Begari
  • [PATCH 1/4] firmware: zynqmp: Add HW PCR API for Versal Gen 2 Padmarao Begari
  • [PATCH 2/4] tpm: Add AMD Versal Gen 2 TPM2 driver Padmarao Begari
  • Re: [PATCH 2/4] tpm: Add AMD Versal Gen 2 TPM2 driver Ilias Apalodimas
  • RE: [PATCH 2/4] tpm: Add AMD Versal Gen 2 TPM2 driver Begari, Padmarao
  • [PATCH 3/4] firmware: zynqmp: Bind TPM2 driver for Versal Gen 2 Padmarao Begari
  • [PATCH 4/4] configs: amd: Enable Versal Gen 2 TPM2 driver Padmarao Begari
• Re: [PATCH v1 3/3] common: Allow relocations on the top of the last bank Ilias Apalodimas
  • Re: [PATCH v1 3/3] common: Allow relocations on the top of the last bank Marek Vasut
  • Re: [PATCH v1 3/3] common: Allow relocations on the top of the last bank Ilias Apalodimas
  • Re: [PATCH v1 3/3] common: Allow relocations on the top of the last bank Marek Vasut
• Re: [PATCH v1 2/3] fdtdec: Introduce fdtdec_setup_mem_ram_top() to determine end of topmost DRAM bank Ilias Apalodimas
  • Re: [PATCH v1 2/3] fdtdec: Introduce fdtdec_setup_mem_ram_top() to determine end of topmost DRAM bank Marek Vasut
• [PATCH 0/3] Add PCIe and NVMe support for AMD Versal Gen 2 Pranav Sanwal
  • [PATCH 3/3] amd: versal2: Enable PCIe/NVMe support and add NVMe boot target Pranav Sanwal
  • [PATCH 1/3] pci: Add AMD Versal2 DW PCIe host controller driver Pranav Sanwal
  • [PATCH 2/3] arm: versal2: Map PCIe DBI and config regions when PCIe is enabled Pranav Sanwal
  • Re: [PATCH 0/3] Add PCIe and NVMe support for AMD Versal Gen 2 Michal Simek
• Re: [PATCH 1/2] firmware: scmi: Fix setting the function Michal Simek
  • Re: [PATCH 1/2] firmware: scmi: Fix setting the function Dan Carpenter
• Pull request doc-2026-04-rc6 Heinrich Schuchardt
  • Re: Pull request doc-2026-04-rc6 Tom Rini
• Re: [PATCH v2 2/2] kbuild: Use relative paths in generated .incbin directives Rasmus Villemoes
  • Re: [PATCH v2 2/2] kbuild: Use relative paths in generated .incbin directives Simon Glass
  • Re: [PATCH v2 2/2] kbuild: Use relative paths in generated .incbin directives Rasmus Villemoes

• Later messages