On 22/07/26 10:27:22, [email protected] wrote:
> On 7/22/26 08:07, Jorge Ramirez-Ortiz wrote:
> > This file implements the legacy single-command OPTEE_MSG_RPC_CMD_RPMB
> > supplicant (eMMC only). Rename it to rpmb_legacy.c so the primary rpmb.c
> > name is free for the RPMB subsystem interface added next; pure rename plus
> > its Makefile object, no functional change.
> >
> > Signed-off-by: Jorge Ramirez-Ortiz <[email protected]>
> > ---
> > drivers/tee/optee/Makefile | 2 +-
> > drivers/tee/optee/{rpmb.c => rpmb_legacy.c} | 0
> > 2 files changed, 1 insertion(+), 1 deletion(-)
> > rename drivers/tee/optee/{rpmb.c => rpmb_legacy.c} (100%)
> >
> > diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile
> > index 36ac085ef42..8321cf53a19 100644
> > --- a/drivers/tee/optee/Makefile
> > +++ b/drivers/tee/optee/Makefile
> > @@ -3,4 +3,4 @@
> > obj-$(CONFIG_OPTEE) += core.o
> > obj-y += supplicant.o
> > obj-$(CONFIG_DM_I2C) += i2c.o
> > -obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
> > +obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb_legacy.o
> > diff --git a/drivers/tee/optee/rpmb.c b/drivers/tee/optee/rpmb_legacy.c
> > similarity index 100%
> > rename from drivers/tee/optee/rpmb.c
> > rename to drivers/tee/optee/rpmb_legacy.c
>
> Why not rpmb_emmc ?
>
> Neil
right this is what is confusing about the current abstraction; op-tee has two
modes:
1. Legacy mode (legacy_operation = true)
- Uses the original RPC command OPTEE_RPC_CMD_RPMB.
- No device enumeration — assumes a single, fixed eMMC RPMB device at
- CFG_RPMB_FS_DEV_ID (dev_type = OPTEE_RPC_RPMB_EMMC).
- This is the fallback for older supplicants that don't understand the
probe protocol
2. Probe / new mode (legacy_operation = false)
- Uses OPTEE_RPC_CMD_RPMB_PROBE_RESET + OPTEE_RPC_CMD_RPMB_PROBE_NEXT
to enumerate RPMB devices, then OPTEE_RPC_CMD_RPMB_FRAMES for the
actual frame I/O.
- Supports multiple RPMB devices
- OP-TEE probes all devices first, deferring key provisioning until
every device is examined.
This PR adds supports for UFS using the new mode of operation that
enumerates devices instead of the legacy mode.
In the meantime eMMC continues to use the legacy mode.
So the super-sets are legacy (for emmc) and probe/default (for UFS and
eventually eMMC/NVMe and so on).
