This series adds MMC support for the SpacemiT K1: an SDHCI platform
driver, the SD card device-tree overlay, defconfig options, and SPL
boot-device selection from the SoC strap/config registers. The SDHCI
driver is usable in both SPL and U-Boot proper.

A flashing guide (doc/board/spacemit/k1-flash.rst) describes how to
write images to eMMC.

---
Changes in v6:
- pinctrl: Fix drive strength configuration.
- pinctrl: Fix pull-up/pull-down configuration.
- pinctrl: Use dev_read_phandle_with_args() to fetch "spacemit,syscon" instead.
- spacemit: rebase on latest upstream branch.
- Link to v5: 
https://patch.msgid.link/[email protected]

Changes in v5:
- mmc: Split CMD23 support out.
- mmc: Use read_poll_timeout().
- mmc: Set pinctrl state based on selected timing mode.
- mmc: Remove the condition based on quirks.
- pinctrl: Fix power source argument.
- dts: Add missing power source on mmc pins.
- Link to v4: 
https://patch.msgid.link/[email protected]

Changes in v4:
- mmc: Add CMD23 for write.
- mmc: Fix CMD23 only for CMD18.
- mmc: Update bulk release operations on reset and clocks for spacemit
  platform driver.
- MAINTAINER: update the maintainer of Spacemit K1.
- Link to v3: 
https://patch.msgid.link/[email protected]

Changes in v3:
- pinctrl: Fix "fast" by "uhs".
- pinctrl: Add syscon dependency.
- mmc: Fix quick by capability.
- doc: Add SD boot support.
- Link to v2: 
https://lore.kernel.org/u-boot/[email protected]/T/#m2aba875a2696a7bb9b704618d22ae2fd7f7f5acc

Changes in v2:
- cmd: drop patches on eminfo & tlv_eeprom.
- configs: Enable ADMA and SYSCON support.
- dts: Use vmmc-supply as vqmmc-supply on the SD card node.
- mmc: k1: Enable ADMA mode support, use CMD23 for multi-block
  read/write, correct pinctrl state from "fast" to "uhs".
- mmc: sdhci: Add new quirk patch to enable CMD23 for multi-block
  transfers.
- pinctrl: k1: Add new IO power domain configuration support for
  dual-voltage GPIO banks.
- spacemit: k1: Use FIELD_GET() to parse boot strap mode.
- Link to v1: 
https://lore.kernel.org/u-boot/[email protected]/

To: [email protected]
To: [email protected]
To: [email protected]
Cc: Huan Zhou <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Tim Ouyang <[email protected]>
Cc: Leo Liang <[email protected]>
Cc: Raymond Mao <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Cc: Bhimeswararao Matsa <[email protected]>
Cc: Tanmay Kathpalia <[email protected]>
Cc: Kaustabh Chakraborty <[email protected]>
Cc: Han Xu <[email protected]>
Cc: Yanir Levin <[email protected]>
Cc: Christoph Stoidner <[email protected]>
Cc: Balsundar Ponnusamy <[email protected]>
Cc: Daniel Palmer <[email protected]>
Cc: Anshul Dalal <[email protected]>
Cc: Bastien Curutchet <[email protected]>
Cc: Angelo Dureghello <[email protected]>
Cc: Johan Jonker <[email protected]>
Cc: Sam Protsenko <[email protected]>
Cc: Guodong Xu <[email protected]>
Cc: Yao Zi <[email protected]>
Cc: Rick Chen <[email protected]>
Cc: Leo <[email protected]>
Signed-off-by: Eric Chung <[email protected]>

---
Eric Chung (11):
      spacemit: k1: select boot device via config registers
      pinctrl: k1: fix drive strength configuration
      pinctrl: k1: fix pull-up/pull-down configuration
      pinctrl: k1: add IO power domain configuration support
      mmc: k1: add sdhci platform driver
      dts: k1: add SD card support in u-boot overlay
      configs: k1: enable SD and eMMC support
      MAINTAINER: update Spacemit K1 entry
      doc: spacemit: flash on K1 SoC based boards
      config: k1: enable ENV support for eMMC
      spacemit: k1: load product name from environment variable

 arch/riscv/dts/k1-bananapi-f3-u-boot.dtsi |  91 +++-
 arch/riscv/dts/k1-musepi-pro-u-boot.dtsi  |  86 +++-
 board/spacemit/k1/MAINTAINERS             |   5 +-
 board/spacemit/k1/spl.c                   | 160 ++++---
 configs/spacemit_k1_defconfig             |  27 +-
 doc/board/spacemit/index.rst              |   1 +
 doc/board/spacemit/k1-mmc.rst             | 320 ++++++++++++++
 drivers/mmc/Kconfig                       |   7 +
 drivers/mmc/Makefile                      |   1 +
 drivers/mmc/spacemit_sdhci.c              | 673 ++++++++++++++++++++++++++++++
 drivers/pinctrl/spacemit/Kconfig          |   2 +-
 drivers/pinctrl/spacemit/pinctrl-k1.c     | 118 +++++-
 12 files changed, 1422 insertions(+), 69 deletions(-)
---
base-commit: b635d43bca429500cb8ef20aa151cb5773b9a8a5
change-id: 20260629-m4-98e01659fefb

Best regards,
--  
Eric Chung <[email protected]>

Reply via email to