Hi Simon, On Wed, Jul 29, 2026 at 12:23 AM Simon Glass <[email protected]> wrote: > > Hi Bhargav, > > On 2026-07-26T11:56:45, Bhargav Das <[email protected]> wrote: > > > Sent as an RFC to get feedback on the overall approach before polishing > > further. > > Could you also add some docs under doc/board/raspberrypi/ describing > the SoC, what works, and the flashing/boot procedure. You already have > most of that material in this cover letter (the picotool steps and the > bootlog), so it should be easy to turn into a doc patch. It is also > the natural place to explain the 'why' that Peter asked about. >
Thanks for pointing out the issues and your valuable comments in the patch series. I am away from my setup for next few weeks so please expect delays from my end. > > This series selects CPU_V7M for RP2350. RP2350's Cortex-M33 core is > > Armv8-M since there is no CPU_V8M support in U-Boot yet. Is CPU_V7M > > acceptable as a starting point with CPU_V8M as a later follow-up? > > Reusing CPU_V7M as a starting point seems reasonable - but a proper > CPU_V8M variant may be better down the road (you could mention that in > your docs). > > Regards, > Simon
