On 7/29/26 2:32 PM, [email protected] wrote:
From: Randolph Sapp <[email protected]>
Add initial board support for the PocketBeagle 2, based on Robert Nelson
and Bryan Brattlof's work. Unify all debug consoles to main_uart6. Use
DDR config v10.32 from our sysconfig tool [1] for Kingston's memory [2],
(4Gb Desnity with a CL of 11 and CWL of 9). Add support for the
SPL_TEXT_BASE config parameter. Ensure all files have a summary and SPDX
identifier.
Also, use board_get_usable_ram_top() to fixup our relocaddr since
otherwise the u-boot stack reservation will collide with the
wkup_r5fss0_core0_memory_region.
[1] https://dev.ti.com/sysconfig
[2]
https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/6465/D2516AN9EXGXN-TU.pdf
Signed-off-by: Randolph Sapp <[email protected]>
---
v3:
- Use board_get_usable_ram_top
---
arch/arm/dts/Makefile | 1 +
...> k3-am62-pocketbeagle2-ddr4-1600MTs.dtsi} | 92 +++---
...dtsi => k3-am62-pocketbeagle2-u-boot.dtsi} | 160 ++++++----
arch/arm/dts/k3-am62-r5-pocketbeagle2.dts | 35 +++
arch/arm/mach-k3/am62x/Kconfig | 1 +
board/beagle/pocketbeagle2/Kconfig | 60 ++++
board/beagle/pocketbeagle2/MAINTAINERS | 10 +
board/beagle/pocketbeagle2/Makefile | 9 +
.../board-cfg.yaml | 0
.../{beagleplay => pocketbeagle2}/pm-cfg.yaml | 0
board/beagle/pocketbeagle2/pocketbeagle2.c | 58 ++++
.../pocketbeagle2/pocketbeagle2.env} | 20 +-
.../pocketbeagle2}/rm-cfg.yaml | 4 +-
.../sec-cfg.yaml | 0
...onfig => am62_pocketbeagle2_a53_defconfig} | 24 +-
...config => am62_pocketbeagle2_r5_defconfig} | 11 +-
doc/board/beagle/am62_pocketbeagle2.rst | 279 ++++++++++++++++++
doc/board/beagle/index.rst | 1 +
.../configs/{beagley_ai.h => pocketbeagle2.h} | 8 +-
19 files changed, 636 insertions(+), 137 deletions(-)
copy arch/arm/dts/{k3-am62x-sk-ddr4-1600MTs.dtsi =>
k3-am62-pocketbeagle2-ddr4-1600MTs.dtsi} (97%)
copy arch/arm/dts/{k3-am67a-beagley-ai-u-boot.dtsi =>
k3-am62-pocketbeagle2-u-boot.dtsi} (53%)
Beagley-AI and PocketBeagle2 are completely different boards, any similarity
between the DTSI files is coincidental. Why is git thinking 53% is enough
similarity to consider this a copy, making the diff mostly nonsense?
See if you can adjust your format-patch params to fix this.
create mode 100644 arch/arm/dts/k3-am62-r5-pocketbeagle2.dts
create mode 100644 board/beagle/pocketbeagle2/Kconfig
create mode 100644 board/beagle/pocketbeagle2/MAINTAINERS
create mode 100644 board/beagle/pocketbeagle2/Makefile
copy board/beagle/{beagleplay => pocketbeagle2}/board-cfg.yaml (100%)
copy board/beagle/{beagleplay => pocketbeagle2}/pm-cfg.yaml (100%)
create mode 100644 board/beagle/pocketbeagle2/pocketbeagle2.c
copy board/{ti/am62x/am62x.env => beagle/pocketbeagle2/pocketbeagle2.env}
(64%)
copy board/{phytec/phycore_am62x => beagle/pocketbeagle2}/rm-cfg.yaml (99%)
copy board/beagle/{beagleplay => pocketbeagle2}/sec-cfg.yaml (100%)
copy configs/{am62x_beagleplay_a53_defconfig =>
am62_pocketbeagle2_a53_defconfig} (87%)
copy configs/{am62x_beagleplay_r5_defconfig =>
am62_pocketbeagle2_r5_defconfig} (89%)
create mode 100644 doc/board/beagle/am62_pocketbeagle2.rst
copy include/configs/{beagley_ai.h => pocketbeagle2.h} (57%)
Same here.
Andrew
