On 8/6/26 2:54 PM, Carlo Caione wrote:
The MTU3 glue driver expects a synthetic mediatek,ssusb child that
combines the device and xHCI register windows. Upstream devicetrees
instead put the device resources on the controller node and describe the
xHCI window with a standard child node, so U-Boot cannot use an upstream
topology.
Switch to the upstream layout. The controller owns the shared resources
and the device MAC, with the device register offsets relative to it as in
Linux. The gadget role binds as a node-less internal device, while the
host role binds to an enabled xHCI child and uses its own clocks,
supplies and register window. dr_mode selects the role and defaults to
otg, and the Kconfig choice constrains which role the build provides.
The legacy child layout is rejected explicitly so its combined register
window cannot be mistaken for the device MAC.
Convert the in-tree MT8183 and MT8512 devicetrees in the same commit so
neither platform is left without USB. MT8512 stays peripheral-only
because its xHCI host interrupt is not documented and the
mediatek,mtk-xhci binding requires it.
Signed-off-by: Carlo Caione <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
