On Thu, Aug 6, 2026 at 2:46 PM Ozan Durgut <[email protected]> wrote: > > From: Ozan Durgut <[email protected]> > > TARGET_SC598_SOM_EZLITE's 'select ADI_CARRIER_SOMCRR_EZLITE' loses > against the carrier choice's own default (ADI_CARRIER_SOMCRR_EZKIT) > since defconfig did not pin it explicitly. Board built with EZKIT > carrier init, so the EZLITE's eth0-reset line was never toggled and > the PHY stayed in reset. > > Fixes: c9e893d6266d ("board: adi: Add support for SC598") > Signed-off-by: Ozan Durgut <[email protected]> > --- > configs/sc598-som-ezlite-spl_defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/configs/sc598-som-ezlite-spl_defconfig > b/configs/sc598-som-ezlite-spl_defconfig > index 9afe5c0789a..9ae5bdad6ca 100644 > --- a/configs/sc598-som-ezlite-spl_defconfig > +++ b/configs/sc598-som-ezlite-spl_defconfig > @@ -12,6 +12,7 @@ CONFIG_SPL_STACK=0x200E4000 > CONFIG_SC59X_64=y > CONFIG_SYS_BOOTM_LEN=0x4000000 > CONFIG_SYS_LOAD_ADDR=0x90000000 > +CONFIG_ADI_CARRIER_SOMCRR_EZLITE=y > CONFIG_CGU1_PLL3_DDRCLK=y > CONFIG_CGU1_PLL3_VCO_MSEL=64 > CONFIG_CGU1_PLL3_DCLK_DIV=2 > -- > 2.43.0 >
Reviewed-by: Greg Malysa <[email protected]>
