From: Suhrid Subramaniam <[email protected]>
Check that priv->clk has been populated before trying to use it in the
MediaTek serial driver.
The clock is optional and may not be populated in all cases (in which
case it is expected that there was a fixed clock rate provided.)
Fixes: 3b17f2e2c2a9 ("serial: mtk: add support for using dynamic baud clock
souce")
Signed-off-by: Suhrid Subramaniam <[email protected]>
Signed-off-by: David Lechner <[email protected]>
---
drivers/serial/serial_mtk.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/serial/serial_mtk.c b/drivers/serial/serial_mtk.c
index 28e87f485a2..0f1d3b63f23 100644
--- a/drivers/serial/serial_mtk.c
+++ b/drivers/serial/serial_mtk.c
@@ -215,9 +215,13 @@ static int mtk_serial_setbrg(struct udevice *dev, int
baudrate)
struct mtk_serial_priv *priv = dev_get_priv(dev);
ulong clk_rate;
- clk_rate = clk_get_rate(&priv->clk);
- if (IS_ERR_VALUE(clk_rate) || clk_rate == 0)
+ if (clk_is_valid(&priv->clk)) {
+ clk_rate = clk_get_rate(&priv->clk);
+ if (IS_ERR_VALUE(clk_rate) || clk_rate == 0)
+ return -EINVAL;
+ } else {
clk_rate = priv->fixed_clk_rate;
+ }
_mtk_serial_setbrg(priv, baudrate, clk_rate);
--
2.43.0
