Hi Lucas,
On 8/6/26 12:18, Lucas Tanure wrote:
This series adds initial mainline support for the Amlogic T7 SoC
family and the Khadas VIM4 board (A311D2):
- S4-generation UART support
- the T7 platform code
- VIM4 board and defconfig
- VIM4 documentation
Tested on a Khadas VIM4 board, both chainloaded from the vendor U-Boot
(tftpboot) and cold-booted from an SD card.
Lucas Tanure (4):
serial: meson: add Amlogic S4 UART support
arm: meson: add Amlogic T7 SoC family support
board: amlogic: add Khadas VIM4 support
doc: board: amlogic: add Khadas VIM4 documentation
Overall this looks good, I'll review all the changes closely,
Neil
.../amlogic-t7-a311d2-khadas-vim4-u-boot.dtsi | 22 ++++
arch/arm/include/asm/arch-meson/boot0.h | 18 +++
arch/arm/mach-meson/Kconfig | 10 ++
arch/arm/mach-meson/Makefile | 1 +
arch/arm/mach-meson/board-t7.c | 97 ++++++++++++++
board/amlogic/vim4/MAINTAINERS | 8 ++
board/amlogic/vim4/Makefile | 4 +
board/amlogic/vim4/vim4.c | 14 ++
configs/khadas-vim4_defconfig | 27 ++++
doc/board/amlogic/index.rst | 119 ++++++++---------
doc/board/amlogic/khadas-vim4.rst | 122 ++++++++++++++++++
drivers/serial/serial_meson.c | 51 ++++++--
12 files changed, 421 insertions(+), 72 deletions(-)
create mode 100644 arch/arm/dts/amlogic-t7-a311d2-khadas-vim4-u-boot.dtsi
create mode 100644 arch/arm/include/asm/arch-meson/boot0.h
create mode 100644 arch/arm/mach-meson/board-t7.c
create mode 100644 board/amlogic/vim4/MAINTAINERS
create mode 100644 board/amlogic/vim4/Makefile
create mode 100644 board/amlogic/vim4/vim4.c
create mode 100644 configs/khadas-vim4_defconfig
create mode 100644 doc/board/amlogic/khadas-vim4.rst
