On Fri, 10 Jul 2026 10:05:12 +0000, Jonas Karlman wrote: > This series picks USB related DT commits from v7.2-rc1-dts to enabled > USB support on existing RK3528 boards. It also adds required DT nodes > and enables required Kconfig options on the Generic RK3528 target. > > The 'Add watchdog node for RK3528' commit was included to fully sync > RK3528 DTs up to v7.2-rc1 state, it is not required for USB support. > > [...]
Applied to https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip (u-boot-rockchip-2027.01), thanks! [1/7] arm64: dts: rockchip: Add watchdog node for RK3528 https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip/-/commit/a29794199190dee25a809210aad66ce5a18ef27f [2/7] arm64: dts: rockchip: Add USB nodes for RK3528 https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip/-/commit/42437844e1dc7b78661d8d66cb9939ad0f981734 [3/7] arm64: dts: rockchip: Enable USB 2.0 ports on Radxa E20C https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip/-/commit/34aecf3758bbb0251159cda1e0fa5c8a7aaa3f4f [4/7] arm64: dts: rockchip: Enable USB ports on Radxa ROCK 2A/2F https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip/-/commit/7382b32c71b1c160c96678b32ccad6737f6cd5aa [5/7] arm64: dts: rockchip: Enable USB 2.0 ports on ArmSoM Sige1 https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip/-/commit/6426f2d2b3105e75a45e703ae4e6a90a7bc603f9 [6/7] arm64: dts: rockchip: Enable USB 2.0 ports on NanoPi Zero2 https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip/-/commit/a6c6a2fd5bdd71fa6eedaf79ed6c55921741c9c9 [7/7] rockchip: rk3528-generic: Add support for USB OTG https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip/-/commit/8d913de45891bc79dcf2337e03da6b7ec4e83518 Best regards, -- Quentin Schulz <[email protected]>
