On 8/26/26 8:09 AM, Julien Stephan wrote: > Enable the configuration required for the HDMI pipeline on MT8188 > based boards such as the Genio 510 EVK (MT8370) and Genio 700 EVK > (MT8390): video, the MediaTek HDMI driver, DM I2C for the DDC bus, > the PHY uclass and splash screen support. > > Signed-off-by: Julien Stephan <[email protected]> > --- > configs/mt8188.config | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/configs/mt8188.config b/configs/mt8188.config > index 29e2b3db878..9d7cf13a191 100644 > --- a/configs/mt8188.config > +++ b/configs/mt8188.config > @@ -9,13 +9,18 @@ CONFIG_TARGET_MT8188=y > CONFIG_SYS_LOAD_ADDR=0x4c000000 > CONFIG_FIT=y > CONFIG_BOOTSTD_FULL=y > +# CONFIG_EXPO is not set
Why disabling this? > # CONFIG_BOARD_INIT is not set > CONFIG_CMD_CLK=y > CONFIG_CMD_GPT=y > +CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > +CONFIG_CMD_BMP=y > CONFIG_OF_UPSTREAM=y > CONFIG_CLK=y > +CONFIG_DM_I2C=y > CONFIG_MMC_MTK=y > +CONFIG_PHY=y > CONFIG_PINCTRL=y > CONFIG_PINCONF=y > CONFIG_PINCTRL_MT8188=y > @@ -25,6 +30,13 @@ CONFIG_BAUDRATE=921600 > CONFIG_DM_SERIAL=y > CONFIG_MTK_SERIAL=y > # CONFIG_WATCHDOG_AUTOSTART is not set > +CONFIG_VIDEO=y > +CONFIG_VIDEO_MEDIATEK_HDMI=y > +CONFIG_SPLASH_SCREEN=y Since upstream doesn't have everything needed to actually make the splash screen work, I was thinking we should just set VIDEO_LOGO=y here instead. > +CONFIG_SPLASH_SCREEN_ALIGN=y > +CONFIG_SPLASH_SOURCE=y > +CONFIG_VIDEO_BMP_RLE8=y > +CONFIG_BMP_24BPP=y > CONFIG_WDT=y > CONFIG_WDT_MTK=y > # CONFIG_RANDOM_UUID is not set >
