Just check that CONFIG_XPL_BUILD is not set to select files for U-Boot
proper build. Indeed, CONFIG_TPL_BUILD being set implies by design that
CONFIG_XPL_BUILD is set too, therefore CONFIG_XPL_BUILD not set implies
that CONFIG_TPL_BUILD is not set either, making its check needless.

Fixes: 371dc068bbf5 ("drivers: Use CONFIG_XPL_BUILD instead of 
CONFIG_SPL_BUILD")
Signed-off-by: Massimo Pegorer <[email protected]>
---
 drivers/Makefile          | 2 +-
 drivers/bus/Makefile      | 2 +-
 drivers/mtd/Makefile      | 2 +-
 drivers/mtd/nand/Makefile | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index 269c3db12e8..da37338fe1f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -87,7 +87,7 @@ obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR) += ddr/fsl/
 
 endif
 
-ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),)
+ifeq ($(CONFIG_XPL_BUILD),)
 
 obj-y += ata/
 obj-$(CONFIG_DM_DEMO) += demo/
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 2d242bc2886..239d9a35fe4 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the bus drivers.
 #
 
-ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),)
+ifeq ($(CONFIG_XPL_BUILD),)
 obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o
 obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
 endif
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index ce05e206073..e204f19ff8b 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -16,7 +16,7 @@ mtd-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o
 mtd-$(CONFIG_HBMC_AM654) += hbmc-am654.o
 
 # U-Boot build
-ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),)
+ifeq ($(CONFIG_XPL_BUILD),)
 
 ifneq ($(mtd-y),)
 obj-y += mtd.o
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index c8169cf7390..cf53c5f601e 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),)
+ifeq ($(CONFIG_XPL_BUILD),)
 nandcore-objs := core.o bbt.o
 obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
 obj-$(CONFIG_MTD_RAW_NAND) += raw/

-- 
2.34.1

Reply via email to