Add initial support for SpacemiT K3 Pico-ITX board, the config file will enable all basic components which make it able to run into U-Boot serial console.
The series actually depend on previous sent patches, I'm not adding dependency to this series, but list it here for reference. Pinctrl: https://patch.msgid.link/[email protected] https://patch.msgid.link/[email protected] GPIO: https://patch.msgid.link/[email protected] clock and reset: https://patch.msgid.link/[email protected] Signed-off-by: Yixun Lan <[email protected]> --- Yixun Lan (4): board: spacemit: add SpacemiT K3 Pico-ITX riscv: dts: spacemit: k3: add binman node configs: spacemit: Add K3 default configuration doc: spacemit: k3: Add Pico-ITX board arch/riscv/Kconfig | 5 + arch/riscv/cpu/k3/Kconfig | 18 +++ arch/riscv/cpu/k3/Makefile | 5 + arch/riscv/cpu/k3/dram.c | 29 +++++ arch/riscv/dts/k3-u-boot.dtsi | 6 + board/spacemit/k3/Kconfig | 30 +++++ board/spacemit/k3/MAINTAINERS | 8 ++ board/spacemit/k3/Makefile | 5 + board/spacemit/k3/board.c | 4 + configs/spacemit_k3_defconfig | 50 ++++++++ doc/board/spacemit/index.rst | 1 + doc/board/spacemit/spacemit-pico-itx.rst | 204 +++++++++++++++++++++++++++++++ include/configs/k3.h | 13 ++ 13 files changed, 378 insertions(+) --- base-commit: 9ab84467bbbdf6a9149f6c66664c65b18c7b7f21 change-id: 20260921-00-basic-spacemit-k3-838119645d39 Best regards, -- Yixun Lan <[email protected]>
