Enable the SpacemiT platform glue for the DesignWare Ethernet QoS controller together with the generic PHY framework, Gigabit Ethernet PHY support and the Realtek PHY driver.
Enable DHCP, MII, ping and PXE commands for network configuration, diagnostics and network boot. Allow U-Boot to generate a random Ethernet address when no valid address is provided by the board. Signed-off-by: Yixun Lan <[email protected]> --- configs/spacemit_k3_defconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/configs/spacemit_k3_defconfig b/configs/spacemit_k3_defconfig index 6ca41aecc41..3a70a0a4858 100644 --- a/configs/spacemit_k3_defconfig +++ b/configs/spacemit_k3_defconfig @@ -24,10 +24,15 @@ CONFIG_SYS_PBSIZE=276 CONFIG_HUSH_PARSER=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_PXE=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SYSCON=y CONFIG_CLK_SPACEMIT=y CONFIG_CLK_SPACEMIT_K3=y @@ -35,6 +40,11 @@ CONFIG_SPACEMIT_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_SPACEMIT_K1=y CONFIG_MISC=y +CONFIG_PHY_GIGE=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_SPACEMIT=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY=y CONFIG_PINCTRL=y CONFIG_PINCTRL_SPACEMIT_K1=y CONFIG_DM_PMIC=y -- 2.55.0
