The 1x100GE + 4x25G split of SerDes 1 is in next since v1, commit
035d68fc36b5 ("lx2160: add lx2160_serdes split and management").

v4 builds on it with incremental patches to ease reviews, but with
many reworks:

- No more command that re-groups the lanes at the prompt: the MC has
  already started. Use hwconfig
- hwconfig values are named based on needed cases:
  serdes1:split becomes serdes1:100g4x25g (patch 2)
- Use a table
- One patch per new mode: 2x40GE, 1x40GE + 4x10G and 1x100GE + 4x10G
- Rewrite documentation
- Add and apply to nbxv3

It is now mainly tested on a Nodebox v3
  setenv hwconfig serdes1:<mode>
  saveenv
  reset

- print checks using lx2160_serdes status 1
- in Linux, with the matching MC DPC, DPL: each case has its netdevices

v3: https://lore.kernel.org/u-boot/[email protected]/
v2: https://lore.kernel.org/u-boot/[email protected]/

Changes in v4:
- rebased on next, incremental over v1 instead of replacing it
- 1/10 (new): drop `lx2160_serdes split`
- 2/10 (new): rename serdes1:split to serdes1:100g4x25g
- 3/10 (new): use a table to set SD1
- 4/10 (new): report invalid serdes1 names
- 5/10 (new): refuse once the MC runs
- 6/10, 7/10, 8/10: resp. v3 2/5, 3/5, 4/5: add other modes
- 9/10: v3 5/5, rewritten doc
- 10/10 (new): apply sd1 for the nbxv3

Vincent Jardin (10):
  board: lx2160a: serdes: drop the split subcommand
  board: lx2160a: serdes: rename serdes1:split to serdes1:100g4x25g
  board: lx2160a: serdes: set SD1 with a table
  board: lx2160a: serdes: report unknown SD1 cases
  board: lx2160a: serdes: no SD1 config once MC runs
  board: lx2160a: serdes: add serdes1:2x40g
  board: lx2160a: serdes: add serdes1:40g4x10g
  board: lx2160a: serdes: add serdes1:100g4x10g
  doc: lx2160a: document the sd1 hwconfig option
  board: nbxv3: apply sd1 hwconfig before MC starts

 .../cpu/armv8/fsl-layerscape/doc/README.soc   |   7 +
 board/nxp/lx2160a/eth_lx2160aqds.c            |   4 +-
 board/nxp/lx2160a/nbxv3/eth_nbxv3.c           |   3 +
 board/nxp/lx2160a/serdes_split.c              | 588 ++++++++++++++----
 board/nxp/lx2160a/serdes_split.h              |  16 +-
 doc/README.fsl-hwconfig                       |  61 ++
 6 files changed, 556 insertions(+), 123 deletions(-)

---
base-commit: 2b8902913c19eb581fb0d567201c09b8fa46ac74
branch: for-upstream/lx2160a-serdes1-v4

-- 
2.43.0

Reply via email to