On Sat, 12 Sep 2026 20:36:53 +0800, Eric Chung wrote:
> This series adds MMC support for the SpacemiT K1: an SDHCI platform
> driver, the SD card device-tree overlay, defconfig options, and SPL
> boot-device selection from the SoC strap/config registers. The SDHCI
> driver is usable in both SPL and U-Boot proper.
>
> A flashing guide (doc/board/spacemit/k1-flash.rst) describes how to
> write images to eMMC.
>
> [...]
Applied, thanks!
[1/7] spacemit: k1: select boot device via config registers
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/aa3091dcd7012ca77fae5854da62e360a9d4ddeb
[2/7] mmc: k1: add sdhci platform driver
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/18e9745c932718335d0a8cf0223a00d216f71272
[3/7] dts: k1: enable mmc devices in SPL
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/c8d4129cb9a4ef84fb167324a4fee1b2807e9219
[4/7] configs: k1: enable SD and eMMC support
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/f570dfb74e7ddcd4063bec68e3e81a7063179700
[5/7] MAINTAINER: update Spacemit K1 entry
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/a75e1ed839a31f8ae9e534fa76167290f1180d94
[6/7] doc: spacemit: flash on K1 SoC based boards
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/69d82789fe6fdaea697fa124a934aa5e4a92b3d1
[7/7] spacemit: k1: fix product name detection and DTB matching in SPL
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/6f8c134610b9d139ff3e104e4cdba3512c4ee7e1
Best regards,
--
Yixun Lan <[email protected]>
