On 9/28/26 10:08 AM, Julien Stephan wrote: > Enable the configuration required for the DSI pipeline on Genio 350 EVK: > video, regulator fixed, dm_gpio, the MediaTek DSI driver, the PHY uclass > and the startek kd070fhfid015 panel which is the default display for the > Genio 350 EVK. That panel drives its reset and enable lines through > GPIOs only, so no backlight driver is needed. > > Everything else the driver needs, the MIPI DSI PHY included, is selected > by CONFIG_VIDEO_MEDIATEK_DSI. The U-Boot logo is not enabled by a symbol > of its own: CONFIG_VIDEO_LOGO is "default y if !SPLASH_SCREEN", so > CONFIG_VIDEO=y already brings it in. > > CONFIG_VIDEO also turns CONFIG_CONSOLE_MUX and CONFIG_CMD_CLS on by > default. Both are turned back off: the display is only there for the > boot logo, the console stays on the serial port. > > Signed-off-by: Julien Stephan <[email protected]> > --- > configs/mt8365_evk_defconfig | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/configs/mt8365_evk_defconfig b/configs/mt8365_evk_defconfig > index cc01dcf434c..8d47e4b4b97 100644 > --- a/configs/mt8365_evk_defconfig > +++ b/configs/mt8365_evk_defconfig > @@ -5,6 +5,7 @@ CONFIG_POSITION_INDEPENDENT=y > CONFIG_ARCH_MEDIATEK=y > CONFIG_TEXT_BASE=0x4c000000 > CONFIG_NR_DRAM_BANKS=1 > +CONFIG_DM_GPIO=y > CONFIG_DEFAULT_DEVICE_TREE="mediatek/mt8365-evk" > CONFIG_OF_LIBFDT_OVERLAY=y > CONFIG_TARGET_MT8365=y > @@ -12,24 +13,31 @@ CONFIG_SYS_LOAD_ADDR=0x4c000000 > CONFIG_FIT=y > CONFIG_BOOTSTD_FULL=y > CONFIG_DEFAULT_FDT_FILE="mt8365-evk" > +# CONFIG_CONSOLE_MUX is not set
Why do we need to turn this off? > # CONFIG_BOARD_INIT is not set > CONFIG_CMD_CLK=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > +# CONFIG_CMD_CLS is not set Why do we care about turning this command off? > CONFIG_CMD_PMIC=y > CONFIG_CMD_REGULATOR=y > CONFIG_OF_UPSTREAM=y > CONFIG_CLK=y > CONFIG_MMC_MTK=y > +CONFIG_PHY=y > CONFIG_PINCTRL=y > CONFIG_POWER_DOMAIN=y > CONFIG_DM_PMIC=y > CONFIG_DM_PMIC_MTK_PWRAP=y > CONFIG_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_FIXED=y > CONFIG_DM_REGULATOR_MT6357=y > CONFIG_BAUDRATE=921600 > CONFIG_DM_SERIAL=y > CONFIG_MTK_SERIAL=y > +CONFIG_VIDEO=y > +CONFIG_PANEL_STARTEK_KD070FHFID015=y > +CONFIG_VIDEO_MEDIATEK_DSI=y > # CONFIG_WATCHDOG_AUTOSTART is not set > CONFIG_WDT=y > CONFIG_WDT_MTK=y >
