On 8/18/26 10:43, Juuso Rinta wrote: > Report the hardware-limited maximum timeout value to the wdt > uclass by setting max_timeout_ms in the per-device uclass-plat > data during octeontx_wdt_probe(). > > The timeout is programmed via the 16-bit WDOG_LEN field in > configured steps, so the largest representable timeout is > (0xffff << 8) steps. This is then converted to milliseconds > via the timershift and clock rate, and set only when the rate > is valid and non-zero. > > Signed-off-by: Juuso Rinta <[email protected]>
Applied to u-boot-watchdog/next Thanks, Stefan
