Hi, On Wed, 12 Aug 2026 06:41:58 +0530, Balaji Selvanathan via U-Boot wrote: > This series brings up the Monaco (QCS8300) EVK target with a dedicated > pinctrl driver, interconnect driver, a real sa8775p RPMH clock driver > (replacing the generic clk-stub no-op), and PON/SDAM-backed reboot-mode > support so "reboot bootloader" from Linux can be honored by U-Boot. > qcom_qcs8300_defconfig is switched over to the monaco-evk device tree. > > > [...]
Thanks, Applied to https://git.u-boot-project.org/u-boot/custodians/neil.armstrong/u-boot-ufs (main) [1/7] clk: qcom: Add shared RPMH clock driver for SM8550/SM8650/SA8775P (no commit info) [2/7] clk: qcom: qcs8300: Extend GCC clock driver to full gate/RCG coverage (no commit info) [3/7] pinctrl: qcom: Add QCS8300 pinctrl driver (no commit info) [4/7] interconnect: qcom: Add QCS8300 interconnect driver https://git.u-boot-project.org/u-boot/custodians/neil.armstrong/u-boot-ufs/-/commit/9db5fb79c2630e9b4fcb0d17dd8b5f383c783cfb [5/7] arm64: dts: monaco-evk: Add reboot-mode support via PON/SDAM (no commit info) [6/7] arm64: dts: monaco-evk: Force vreg_l8a always-on to protect UFS VCC (no commit info) [7/7] configs: qcom_qcs8300: Switch to monaco-evk DT and enable new drivers (no commit info) -- Neil
