From: Aswin Murugan <[email protected]> U-Boot proper uses the IQS device tree on Shikra. Retain the SPL console, QUP firmware storage, MMC, clock, pinctrl, and power dependencies in the same overlay.
Signed-off-by: Abhilash V <[email protected]> Signed-off-by: Aswin Murugan <[email protected]> --- arch/arm/dts/shikra-iqs-evk-u-boot.dtsi | 42 +++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm/dts/shikra-iqs-evk-u-boot.dtsi b/arch/arm/dts/shikra-iqs-evk-u-boot.dtsi index e807b91ef1f..a1e506f7dff 100644 --- a/arch/arm/dts/shikra-iqs-evk-u-boot.dtsi +++ b/arch/arm/dts/shikra-iqs-evk-u-boot.dtsi @@ -20,3 +20,45 @@ &usb_qmpphy { status = "okay"; }; + +/* Keep the console and QUPFW storage paths in the SPL device tree. */ +&gcc { + bootph-all; +}; + +&tlmm { + bootph-all; +}; + +&qup_uart0_default { + bootph-all; +}; + +&sdc1_state_on { + bootph-all; +}; + +&sdc1_state_off { + bootph-all; +}; + +&sdhc_1 { + bootph-all; +}; + +&qupv3_0 { + bootph-all; +}; + +&uart0 { + bootph-all; +}; + +/* Retain the RPM clock and power-domain providers for boot consumers. */ +&rpmcc { + bootph-all; +}; + +&rpmpd { + bootph-all; +}; -- 2.34.1
