Hi 安容,
On 10/12/26 3:22 PM, 安容 via B4 Relay wrote:
From: 安容 <[email protected]>
The FriendlyElec NanoPi R28S is a dual gigabit Ethernet router board
based on the Rockchip RK3528 SoC. It shares most of its design with the
NanoPi Zero2.
Specifications:
- SoC: Rockchip RK3528, quad-core Cortex-A53 @ 2.0 GHz
- RAM: 1 GB LPDDR4
- Storage: microSD slot, optional onboard eMMC
- Ethernet: 1x GbE (GMAC1 + Realtek RTL8211F),
1x GbE (Realtek RTL8111H over PCIe)
- WiFi: AICSemi AIC8800D80 over SDIO
- USB: 1x USB 2.0 Type-C (power input and OTG)
- UART: USB Type-C debug console (onboard WCH CH340E), 1500000 8N1
- Buttons: user (GPIO), MaskROM (SARADC)
Add the board to the NanoPi RK3528 board target, which selects the
R28S FDT based on its HW_ID, and enable CONFIG_BUTTON_GPIO for the user
button.
Features tested on NanoPi R28S:
- SD-card boot
- Ethernet
Considering we only have very little enabled in SPL DTB, and the things
that are are identical for both boards, this seems safe to do.
[...]
diff --git a/board/friendlyelec/nanopi-rk3528/MAINTAINERS
b/board/friendlyelec/nanopi-rk3528/MAINTAINERS
index 67f14661087..6665e35309a 100644
--- a/board/friendlyelec/nanopi-rk3528/MAINTAINERS
+++ b/board/friendlyelec/nanopi-rk3528/MAINTAINERS
@@ -5,3 +5,9 @@ F: board/friendlyelec/nanopi-rk3528
F: arch/arm/dts/rk3528-nanopi-u-boot.dtsi
F: arch/arm/dts/rk3528-nanopi-zero2*
F: configs/nanopi-zero2-rk3528_defconfig
+
+NANOPI-R28S-RK3528
+M: 安容 <[email protected]>
+R: Jonas Karlman <[email protected]>
+S: Maintained
+F: arch/arm/dts/rk3528-nanopi-r28s*
This means you'll only get Cc'ed on mails touching this file, even
though changes made to all other nanopi rk3528-related files will impact
the R28S as well, maybe just merge the two entries together?
Reviewed-by: Quentin Schulz <[email protected]>
I will likely forget to pick this once the 7.4 devicetree-rebasing tree
is synced in a few months, so feel free to send a v3 series once the
commits are available in 7.4-rc1, or to ping me once we have synced with
7.4 (likely for 2027.04 but I'm assuming you won't wait that long :) )
Cheers,
Quentin
