Hi Tom, The following changes since commit 8649a54d301a4d0ac526324c7a7ad2574939ff27:
mtd: spinand: winbond: Clarify factory BBM offset in OOB layout (2026-10-24 08:24:15 -0600) are available in the Git repository at: https://git.u-boot-project.org/u-boot/custodians/u-boot-imx.git tags/u-boot-imx-main-20261026 for you to fetch changes up to 6887b66797ec825e69c1751bcb716fdfe39f3fd6: colibri_vf: separate the partition numbers in dfu_alt_info with a space (2026-10-26 10:51:28 -0300) u-boot-imx-main-20261026 ------------------------ CI: https://git.u-boot-project.org/u-boot/custodians/u-boot-imx/-/pipelines/1731 - Only read SCU for i.MX6DL/i.MX6Q/i.MX6QP variant detection. - Use the correct GPC registers for the i.MX8MP DDRMIX. - Add FRDM-IMX95-PRO initial support. - Implement memory translation table for i.MX6SX. - Fall back to NOWHERE env location on imx9 SCMI. - Support newer GPU0 bus node name for i.MX8. ---------------------------------------------------------------- Bin Meng (1): arm: imx6: Only read SCU for i.MX6DL/i.MX6Q/i.MX6QP variant detection Francesco Dolcini (1): imx9: scmi: fix up thermal trip points from the temperature grade Frieder Schrempf (3): ddr: imx: Use the correct GPC registers for the i.MX8MP DDRMIX ddr: imx: Recreate the power-on state before repeating ddr_init() imx: kontron-osm-s-mx8mp: Remove DDR reinit workaround Joseph Guo (4): imx95_frdm: Enable remoteproc for i.MX95 FRDM imx95: Remove container.cfg and imximage.cfg imx95_frdm: Kconfig: rename board prompt to imx95_15x15_frdm imx: Add FRDM-IMX95-PRO initial support Markus Niebel (1): imx9: clock: Add missing UART clocks Mehmet Fide (1): colibri_vf: separate the partition numbers in dfu_alt_info with a space Ronaldo Nunez (2): mx6: implement memory translation table imx: bootaux: clarify comment on firmware support Stefan Eichenberger (2): imx: mach: imx8: fdt: return libfdt errors from helpers imx: mach: imx8: fdt: support newer GPU0 bus node name Ye Li (2): imx9: scmi: fall back to NOWHERE env location imx9: scmi: Remove useless scmi protocol devices probe arch/arm/dts/imx95-19x19-frdm-pro-u-boot.dtsi | 65 +++++++++ arch/arm/include/asm/arch-imx8m/imx-regs.h | 10 ++ arch/arm/mach-imx/imx8/fdt.c | 35 ++--- arch/arm/mach-imx/imx9/Kconfig | 10 +- arch/arm/mach-imx/imx9/clock.c | 34 ++++- arch/arm/mach-imx/imx9/scmi/fdt.c | 14 ++ arch/arm/mach-imx/imx9/scmi/soc.c | 15 +- arch/arm/mach-imx/imx_bootaux.c | 17 ++- arch/arm/mach-imx/mx6/soc.c | 37 ++++- board/kontron/osm-s-mx8mp/spl.c | 14 -- board/nxp/imx95_frdm/Kconfig | 2 +- board/nxp/imx95_frdm/MAINTAINERS | 1 + configs/imx95_15x15_evk_defconfig | 2 - configs/imx95_15x15_frdm_defconfig | 139 +----------------- configs/imx95_19x19_frdm_pro_defconfig | 12 ++ configs/imx95_frdm.config | 140 ++++++++++++++++++ doc/board/nxp/imx95_frdm.rst | 29 +++- drivers/ddr/imx/imx8m/ddr_init.c | 196 +++++++++++++++++++++++++- include/configs/colibri_vf.h | 2 +- include/configs/imx95_frdm.h | 4 + 20 files changed, 573 insertions(+), 205 deletions(-) create mode 100644 arch/arm/dts/imx95-19x19-frdm-pro-u-boot.dtsi create mode 100644 configs/imx95_19x19_frdm_pro_defconfig create mode 100644 configs/imx95_frdm.config
