On Sun, Nov 01, 2026 at 03:48:38PM +0530, Balaji Selvanathan wrote: > This series adds support for running U-Boot in snagboot mode on > Qualcomm Snapdragon platforms, targeting the Lemans-EVK board. > > Snagboot (https://github.com/bootlin/snagboot) is a recovery and > reflashing tool that works through the SoC boot ROM. On Qualcomm > SoCs, snagrecover loads XBL over Sahara in EDL mode to initialise > DDR and then loads U-Boot into DDR, where it enters fastboot so > that snagflash can write the images. Support for the Lemans-EVK > (IQ9075) is in the snagboot tree, see the Qualcomm IQ9075 sections of > https://github.com/bootlin/snagboot/blob/main/docs/snagrecover.md > See also the doc/board/qualcomm/snagboot.rst added in patch 7 for > usage and build steps. > > XBL leaves the MMU enabled and does not set up PSCI firmware or > Command DB in this flow, so the series adds a QCOM_SNAGBOOT_MODE > option, an early MMU disable, and a defconfig and config fragment > for Lemans-EVK. > > Tested on Lemans-EVK board.
This all seems fine and I'll leave the Qualcomm-specific reviews to someone else now, thanks for reworking it. -- Tom
signature.asc
Description: PGP signature
