Morning Fellow U2er's! This is probably not the right forum, but I thought that I give it a try. (Yes, I did post this on Yahoo! SB Solution Group, but no reply, at the time this was being written.)
I created a custom query report, that will allow our users to enter in multiple part numbers and number of labels they will need to print. This is how the process works... The user can enter in the part numbers and the number of labels need per part. (This is done through an SB front-end process.) When the user is finished enter in the required data, a program is executed to check the data integrity and to create a savedlist. This savedlist is then used in the report query. Here's where I'm stumped... If the user puts in multiple parts and need just one label for each part, it works fine. If the user puts in one part number, but needs multiple labels for the part, this works fine too. But when the user enters in one part number and needs one label, the label printer will skip lines on the label and screw up the label printer set up. I have check the savedlist and there are no nulls or control characters. Can someone give me some suggestions on why this is happening or did I miss something in my investigation? Thanks in advance! Sincerely, Grant W. Boice, Jr. Systems Administrator Benchmark Electronics, Inc. Manassas Division 8500 Phoenix Drive Manassas, VA 20110 Phone: (703) 334-0156 Email: [EMAIL PROTECTED] Web: www.bench.com <http://www.bench.com/> ------- u2-users mailing list [EMAIL PROTECTED] http://www.u2ug.org/listinfo/u2-users
