Wol

Did suggest that. It has been set since, but on some reports it still does
not work.

The strangest of this to me, is that before we had Lexmark 2381 on the same
port with no problems,
Now that we have replaced it with the 2480/2481 problems.

PS: Both printers have been setup with the same settings & checked.

Thanks so far
Bjorn 

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Anthony Dzikiewicz
Sent: 02 June 2004 03:05
To: [EMAIL PROTECTED]
Subject: RE: [U2] Printer Problem

Do you have the EJECT option in the SETPTR ?  Sometimes printers have an
option to defeat the formfeed.  We are using a printronix where we actually
want this to happen, because we never do form feeds we the application is
always counting lines.  Anyway, these printers may be set to defeat form
feeds.
Anthony

 -----Original Message-----
From:   [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]  On Behalf Of Bjvrn Behr
Sent:   Wednesday, June 02, 2004 6:12 AM
To:     [EMAIL PROTECTED]
Subject:        [U2] Printer Problem

Eric

We acquired some new printers and are busy installing them at our Various
sites. We are just having one problem If I run a report from TCL to the
printer, it does not do a form feed at the end of the print out, And
subsequently, the new report starts printing on the same page.

Any advice?

PS: UniVerse 10.0.4
    Windows  2000
    Printer  Lexmark 2400 Series (2480/81)
________________________________________________________________________
Regards
Bjvrn Behr
Programmer

HYFLO Southern Africa (Pty) Ltd
Tel : +27 11 386 5800
Fax : +27 11 444 5391
Mail: [EMAIL PROTECTED]
WWW : http://www.hyflo.co.za
________________________________________________________________________
"In the beginning, the universe was created.
 This made a lot of people very angry, and  has been widely regarded as a
bad idea."
 - Douglas Noel Adams (b. 1952), British author
________________________________________________________________________
-------
u2-users mailing list
[EMAIL PROTECTED]
To unsubscribe please visit http://listserver.u2ug.org/
-------
u2-users mailing list
[EMAIL PROTECTED]
To unsubscribe please visit http://listserver.u2ug.org/
-------
u2-users mailing list
[EMAIL PROTECTED]
To unsubscribe please visit http://listserver.u2ug.org/

Reply via email to