David, UV 10.1 supports the use of SSL to protect the data flows between client & server, and according to a post from LeRoy Dreyfuss (in early June, check the list archives if you need to) UniAdmin 10.1 will help to walk you through the certificate set-up process.
Alternatively, you could require the users to connect over a VPN, which could either be a firewall-based product or may be do-able in software between the actual client PC and UV server - I don't know, I've never tried that. Good luck! HTH Mike -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of djordan Sent: Wednesday, 21 July 2004 10:27 To: [EMAIL PROTECTED] Subject: RE: [U2] [UV] UniObjects across the internet Hi Thanks for the information. It is a current application, where a number of users would require to access the database across the internet. Although there is new development in progress, this is needed for a short term solution. I have written a process to swap the UniObjects layer with Wintegrate for a uniobjects application and use the telnet interface. This could probably take advantage of secured telnet across the internet. I was looking at other ways of securing UniObjects communication over the internet without too much change to the application Regards David Jordan ------- u2-users mailing list [EMAIL PROTECTED] To unsubscribe please visit http://listserver.u2ug.org/ The information contained in this Internet Email message is intended for the addressee only and may contain privileged information, but not necessarily the official views or opinions of the New Zealand Defence Force. If you are not the intended recipient you must not use, disclose, copy or distribute this message or the information in it. If you have received this message in error, please Email or telephone the sender immediately. ------- u2-users mailing list [EMAIL PROTECTED] To unsubscribe please visit http://listserver.u2ug.org/
