I am getting a message from Objectcall on our test environment Unidata 5.2.26 Tru64 5.1 ( have not tested the Objectcall on this for quite a while ) which says 'ERROR ON CLIENT in UniOpenPos: Client and server product identifiers don't match:b+c and Authentication database use not init ' Works fine on our production server. The server is TRU64 V5.1 which has had enhanced security enabled, while the production server has not. Which probably explains the message. Is there a solution here? ( apart from reverting back to base security). Thanks.
Steven Frost Powerco NZ ##################################################################################### This e-mail message has been scanned for Viruses and Content and cleared by MailMarshal ##################################################################################### **************************************************************************************************************************** CAUTION: This email and any attachments may contain information that is confidential. If you are not the intended recipient, you must not read, copy, distribute, disclose or use this email or any attachments. If you have received this email in error, please notify us and erase this email and any attachments. You must scan this email and any attachments for viruses. DISCLAIMER: Powerco Limited accepts no liability for any loss, damage or other consequences, whether caused by its negligence or not, resulting directly or indirectly from the use of this email or attachments or for any changes made to this email and any attachments after sending by Powerco Limited. The opinions expressed in this email and any attachments are not necessarily those of Powerco Limited. **************************************************************************************************************************** ------- u2-users mailing list [EMAIL PROTECTED] To unsubscribe please visit http://listserver.u2ug.org/
