Robert, you sent me in the right direction. The issue was the need to get the numeric 10-key pad working, by default, in Dynamic Connect so a couple of years ago they modified the vt100 terminal definition and recompiled it. The modification stopped the ability to use the Terminal Emulation Extensions in the Setup screen of Dynamic Connect.
My work around is I switched to the vt220, which was still the original, and added the vtnumoff extension in the Setup/Terminal screen then saved my setup. I then closed the session, reopened it and I get cursor control in the HELP listing and the numbers 1, 2, 3, ... at TCL from the 10-key pad. Thanks for your pointer! BobW > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:owner-u2- > [EMAIL PROTECTED] On Behalf Of Robert Paterson > Sent: Monday, December 06, 2004 9:16 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [U2][UV] Scrolling in the HELP list > > Have you checked the decompiled versions of the terminal drivers? > > untic the vt100 definition on both servers and compare the two would be my > best suggestion... > > > Robert Paterson > Technology Support Manager > www.epicor.com > Tel.: +44 (1344) 468231 > Cell: +44 (7799) 348513 > Fax: +44 (1344) 468050 > E-Mail: [EMAIL PROTECTED] > > 1 The Arena, Downshire Way, Bracknell, Berks, UK, RG12 1PU > This e-mail is for the use of the intended recipient(s) only. If you have > received this e-mail in error, please notify the sender immediately and > then > delete it. If you are not the intended recipient, you must not use, > disclose > or distribute this e-mail without the author's prior permission. We have > taken precautions to minimize the risk of transmitting software viruses, > but > we advise you to carry out your own virus checks on any attachment to this > message. We cannot accept liability for any loss or damage caused by > software viruses. > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward > Sent: 06 December 2004 16:18 > To: [EMAIL PROTECTED] > Subject: RE: [U2][UV] Scrolling in the HELP list > > I've discovered that this problem seems to be server dependant. If I log > into our main server, the problem is there. I can not use the cursor keys > to move up and down the list. If I then go into > SETUP/Communications/Windows Sockets/Setup and change the Host to an > installation of Universe PE on another computer in our network, it then > works. > > Can anyone venture a guess of what I should look at for differences > between > the two installations of Universe? Any guesses would be greatly > appreciated. > > Bob Woodward > Programmer/Analyst > Harbor Wholesale Grocery > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:owner-u2- > > [EMAIL PROTECTED] On Behalf Of Bob Woodward > > Sent: Thursday, December 02, 2004 10:30 AM > > To: [EMAIL PROTECTED] > > Subject: [U2][UV] Scrolling in the HELP list > > > > Hopefully this is a simple question that I just haven't hit the right > > combination on. > > > > I'm trying to figure out how to make the cursor keys scroll up and > down > > when I'm in the HELP listing. I know I had it working at one time but > > now I can't figure out what to do to get that ability back. > > > > Windows 2000 Server > > UV 10.1 > > Dynamic Connect v5.1.2 > > Term type is VT100 > > > > TIA for any help. > > > > Bob Woodward > > Programmer/Analyst > > Harbor Wholesale Grocery > > ------- > > u2-users mailing list > > [EMAIL PROTECTED] > > To unsubscribe please visit http://listserver.u2ug.org/ > ------- > u2-users mailing list > [EMAIL PROTECTED] > To unsubscribe please visit http://listserver.u2ug.org/ > ------- > u2-users mailing list > [EMAIL PROTECTED] > To unsubscribe please visit http://listserver.u2ug.org/ ------- u2-users mailing list [EMAIL PROTECTED] To unsubscribe please visit http://listserver.u2ug.org/
