Kevin, Here is the stty -a output:
root user: # stty -a speed 9600 baud; 0 rows; 0 columns; eucw 1:1:0:0, scrw 1:1:0:0: intr = ^C; quit = ^\; erase = ^H; kill = ^U; eof = ^D; eol = ^@ eol2 = ^@; start = ^Q; stop = ^S; susp = ^Z; dsusp = ^Y; reprint = ^R discard = ^O; werase = ^W; lnext = ^V -parenb -parodd cs8 -cstopb hupcl cread -clocal -parext -ignbrk brkint ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl -iuclc -ixon -ixany -ixoff imaxbel isig icanon -xcase echo echoe echok -echonl -noflsh -tostop echoctl -echoprt echoke -flusho -pending iexten opost -olcuc onlcr -ocrnl -onocr -onlret -ofill -ofdel tab3 non-root, bourne shell, SB+ home directory user: # stty -a speed 9600 baud; 0 rows; 0 columns; eucw 1:1:0:0, scrw 1:1:0:0: intr = ^P; quit = ^_; erase = ^H; kill = ^X; eof = ^D; eol = ^@ eol2 = ^@; start = ^Q; stop = ^S; susp = ^@; dsusp = ^@; reprint = ^R discard = ^O; werase = ^W; lnext = ^V -parenb -parodd cs8 -cstopb -hupcl cread clocal -parext -ignbrk brkint ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl -iuclc -ixon -ixany -ixoff imaxbel isig icanon -xcase echo echoe echok -echonl -noflsh -tostop echoctl -echoprt echoke -flusho -pending iexten opost -olcuc onlcr -ocrnl -onocr -onlret ofill -ofdel tab3 Thanks, Dave Schexnayder. :-) Cheetah Advanced Technologies, Inc. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Kevin King Sent: Thursday, February 03, 2005 2:54 PM To: u2-users@listserver.u2ug.org Subject: RE: [U2] SBClient cannot connect to SB+ on UV/AIX I would first consider the potential that it's a stty problem. What's a sample stty -a say? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Schexnayder Sent: Thursday, February 03, 2005 1:39 PM To: u2-users@listserver.u2ug.org Subject: [U2] SBClient cannot connect to SB+ on UV/AIX I just installed SB+ 5.2.4 on UV/AIX and I cannot get SBClient to probably connect to SB+. Neither GUI nor character mode work. In fact, using TU.VT220, I am unable to get past the login. It replies that I need a newer SBClient version. I am, however, using SBClient 5.2.4.246. Is this an stty problem? I installed UV as root and am user root trying to get this to work. I even setup a user, added new Unix group "sb" as part of the user, set him to bourne shell, home directory to the SB+ home directory. It initiates an SB+ login, but fails to validate after the Terminal ID TU.VT220 is entered. I get the following message after 30-60 seconds: SECURITY VIOLATION 101 You must use a later version of SBClient with this release of SB+. # SBGUI SBClient-Rel-5.2.4.246/VT22032/Cheetah_Falcon/ If it matters, AIX 5.2, UniVerse/AIX 10.1.4. Any help would be appreciated. Thanks, Dave Schexnayder. Cheetah Adv Tech, Inc. ------- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ ------- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ ------- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
