> -----Original Message----- > From: MACK ANDREW, F/S > Sent: Wednesday, 6 April 2005 07:13 > To: HENDERSON MIKE, MR > Subject: RE: [U2] [UV] Win 2K3 Printer setup (Unclassified) > > Paul, > > Thanks for the most excellent advice. I didn't even think of > the print processor. Too wrapped up in drivers and PCL commands :( > > Cheers, > > Andrew > > > -----Original Message----- > From: HENDERSON MIKE, MR > Sent: Tuesday, 5 April 2005 6:17 p.m. > To: MACK ANDREW, F/S > Subject: FW: [U2] [UV] Win 2K3 Printer setup (Unclassified) > > "Ask and you shall receive" > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Paul Tykodi > > Sent: Tuesday, 5 April 2005 17:16 > > To: [email protected] > > Subject: Re: [U2] [UV] Win 2K3 Printer setup (Unclassified) > > > > Dear Andrew, > > > > Since you asked two different questions, regarding potential solutions > > for your current printing dilemma, I am posting two individual e-mail > > responses for clarity. > > > > Question - Is it possible to configure a Windows Printer Driver to > > perform the formatting of report information received from UV 10.0.15? > > > > Answer - Yes > > > > Question - What steps need to be performed to allow this to happen? > > > > Answer - In this scenario, it would be advisable to not send the > > banner page with the embedded PCL sequences. > > > > You need to enter the properties of the appropriate Windows Printer > > Driver(example: FX Document Centre 186 PCL 6) and then select the > > Advanced Tab. > > Next you should click on the Print Processor radio button. In the > > dialog box that is displayed, choose TEXT as the Default data type: > > and then press the OK radio button. > > > > As mentioned in this Microsoft knowledgebase article: > > http://support.microsoft.com/default.aspx?scid=kb;en-us;124735 > > > > "When the TEXT Datatype is selected for a print queue, any incoming > > jobs are formatted using the driver that is set up for the queue." > > This selection will effect all incoming spool files regardless of source. > > > > This would be one method of controlling the format of spool files > > coming from UV 10.0.15 destined for the new Xerox MFP devices. The > > suggestion should work correctly using either the PCL 6 or the > > PostScript drivers for the Document Centre 186. > > > > Best Regards, > > > > /Paul > > > > Date: Thu, 31 Mar 2005 09:57:14 +1200 > > From: "HENDERSON MIKE, MR" <[EMAIL PROTECTED]> > > Subject: [U2] [UV] Win 2K3 Printer setup (Unclassified) > > [snip] The information contained in this Internet Email message is intended for the addressee only and may contain privileged information, but not necessarily the official views or opinions of the New Zealand Defence Force. If you are not the intended recipient you must not use, disclose, copy or distribute this message or the information in it.
If you have received this message in error, please Email or telephone the sender immediately. ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/
