I have had problems like this with other printers at clients - not USB printer but a similar scenario. To resolve it I have had to go to the Windows properties for the printer and ensure that it is set to print RAW data.
I don't know if that helps. Regards, Neil. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Johnson Sent: 27 November 2005 14:24 To: [email protected] Subject: [U2] USB printer on D3 I have D3 installed on an Windows Xp system. I have a HP 1020 LaserJet printer (USB) that works fine on the windows side. I've properly created the device with 1 page eject. I have the printer folder open and when I send a print-job, I hear the wheels spinning on the printer but nothing comes out. I've appended 2-3 char(12)'s to the end of the job to kick it but to no avail. When I go to windows and print a test page, that job waits until I power-down the printer. The D3 job disappears and the test page comes out. Any suggestions? Thanks in advance. Mark Johnson ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.8/184 - Release Date: 27/11/2005 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.8/184 - Release Date: 27/11/2005 ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/
