You should have a serial number in the form: Nnnnnnnn-xxx
The n's represent an 8 digit number and the xxx the product code, which could be UDT, UV or some other item depending on which product. The config code for UniData is generated from the confprod utility and is then fed into the IBM web licencing tool: https://www-927.ibm.com/software/data/u2/support/u2techconnect/authprod. asp Which will probably be the best place for you to look at what you need. Hope that helps. Robert -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of phil walker Sent: 03 Jan 2007 09:19 To: u2-users@listserver.u2ug.org Subject: [U2] Configuration Code Does anyone know what the configuration code should be? I have not been provided with one, and I am in the middle of an upgrade to a development machine ;-).... Cheers, ------- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ This e-mail is for the use of the intended recipient(s) only. If you have received this e-mail in error, please notify the sender immediately and then delete it. If you are not the intended recipient, you must not use, disclose or distribute this e-mail without the author's prior permission. We have taken precautions to minimize the risk of transmitting software viruses, but we advise you to carry out your own virus checks on any attachment to this message. We cannot accept liability for any loss or damage caused by software viruses. ------- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
