Oh no, George - ibm will not answer my support calls now :) The other George Smith
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:owner-u2- > [EMAIL PROTECTED] On Behalf Of George Smith > Sent: Monday, January 22, 2007 11:10 AM > To: [email protected] > Subject: Re: [U2] Microdata Conversion > > Have you considered upgrading to the current Reality (v12) from > Northgate-IS? There should be no conversion at all. You will need to buy > licenses, of course, but it will run on anything, so there will be minimal > hardware expense. > > > > > On 1/18/07, MAJ Programming <[EMAIL PROTECTED]> wrote: > > > > I have a client with a 1986 Microdata Spirit 6000 system that I would > like > > to > > upgrade to something more contemporary. > > > > I had a client on UD Solaris who's software was from Microdata (true > PQN) > > and > > IIRC, the Procs had the MV and other PQN-specific commands intact. They > > have 2 > > UD systems that aren't being used. > > > > The very fact that this MCD client still has a 20 year old box is an > > indication of their economics. > > > > The solution has to be the most cost effective. I know of QM but don't > > know > > the real story of a MCD conversion. I don't think D3 has any MCD-D3 > > conversion > > utilities, Proc-wise. > > > > Should I attempt to purchase one of the UD's for this client and enlist > > Ashwood or someone to install the programs with the media. I believe > that > > UD > > has a conversion utility to adjust the 10 line dict items to the 7 line > > ones. > > > > I am looking forward to being the main programmer with the conversions. > I > > am > > not looking to farm out this project as it will get too expensive real > > fast. > > > > Thanks in advance > > Mark Johnson > > ------- > > u2-users mailing list > > [email protected] > > To unsubscribe please visit http://listserver.u2ug.org/ > > > > > > -- > George Smith, Phoenix, AZ > Member of the Independent Computer Consultants Association since 1983 > ------- > u2-users mailing list > [email protected] > To unsubscribe please visit http://listserver.u2ug.org/ ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/
