We are running UV 10.2 in house with SB+ and SB Client 5.3.4. We have found 3 issues thus far and IBM is working on all of them at this time.
1. When exiting out of an SBClient session by clicking on the "X" in the upper right corner the session will close, but the UniVerse Port is left "logged in." IBM informed us there is also an issue with group locks, see excerpt below. It has come to light that there was a problem introduced in UniVerse 10.2 where if the "QUIT" or "OFF" verbs were being used, an application Error evernt was created and group locks were being left active. Do you recall if your customer appeared to be experiencing active group locks? IBM is shooting for a tentative fix date sometime this month for this issue. 2. When using callHTTP with a client side certificate the POST will return an error because of changes in the new openssl being used. 3. The BASIC command WRITEU no longer retains the lock on the record after the write occurs. We did some testing with 10.1.18 and could not duplicate any of the above issues. We did have a customer running UV 10.2 but backed them down to 10.1.18 and everything appears to running correctly. Mike Mike Dallaire Mortgage Builder Software Inc. (248) 304-0600 ext. 103 [EMAIL PROTECTED] www.mortgagebuilder.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Eastwood Sent: Friday, March 16, 2007 10:23 AM To: [email protected] Subject: [U2] RE: [uv] 10.2 Speaking of UV 10.2 - anyone running it care to share their experience. I've heard rumors of a "locking" issue, but don't know the details. Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:owner-u2- Subject: Re: [U2] Upper Case Only I missed the start of this thread so appologies if this has been said before.... UV 10.2 introduces a CASE command to turn on / off case sensitivity. Unfortunately, as far as I can see, they don't appear to have documented it (along with quite a lot of other new stuff). ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/ ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/
