We have been on Itanium with HP-Ux 11i v2 for perhaps one year. We migrated from HP-Ux v10, UniVerse 8.3.3.
The only hurdle with the migration was checking that all of the applications would run. Amazingly, there is no need to re-compile UniBasic code. There were some issues with dictionaries... legacy junk in the dict SQL field <8> that we were not using anyway. Field <8> had to be purged from all of the dictionaries. If dict field <8> had contraband, retreive paragraph scripts would not run. --Bill -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Stevenson, Charles Sent: Monday, July 16, 2007 12:53 PM To: [email protected] Subject: [U2] UV10.0.16->10.2.x; HP Risc->Itanium; hpux 11.11->11.23 Seeking advice, warnings, testimonials. We are considering moving from HP's RISC platform to their new "Itanium" hardware. This implies a unix upgrade (from HPUX 11.11 to 11.23). Our current uv10.0.16 is not certified for hpux11.23, so I must upgrade to 10.1 or 10.2. & Redback 4.2.3 to at least 4.2.6. I am thinking of going to as modern a version of UV as advisable. Any gotchas going from: - UV 10.0 to 10.2? - would you advise 10.1 instead of 10.2? - hpux 11.11 to 11.23 ? - Risc to Itanium ? - Redback (aka "WDE"): minimal to 4.2.6? Or jump to 4.4? Only 4.3? Any communication on- or off-list is welcome. Thank-you, Charles Stevenson DBA, Getronics, Inc. 714-641-5943 [EMAIL PROTECTED] ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/ ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/
