Hi, I was testing some new software last week, and caused the test server to hang all its UD sessions and refuse new ones. I would get past the UD telnet user / password prompt, but SB Client would disconnect before getting to the SB login prompt.
Looking at the udt.errlog revealed several entries like this udt (pid = 6056) exit at 16:26:30 12/14/07. Error = In ..\..\..\..\..\OBSW\OR.SW+\ORUFO\_RSP.BBC at line 1164 Exception happened: 0xc0000005. The instruction at '0x101354ee' referenced memory at '0xb4b9eca0'. The memory could not be 'read'. There are four entries like this; the instruction address is the same for each one, and the referenced memory is at one of two addresses. This is on UD 7.1, Windows 2003 SP 1. Has anybody seen this kind of error before, or know of any situations which may cause it? Thanks in advance, Adam This electronic message contains information from CACI International Inc or subsidiary companies, which may be confidential, proprietary, privileged or otherwise protected from disclosure. The information is intended to be used solely by the recipient(s) named above. If you are not an intended recipient, be aware that any review, disclosure, copying, distribution or use of this transmission or its contents is prohibited. If you have received this transmission in error, please notify us immediately at [EMAIL PROTECTED] Viruses: Although we have taken steps to ensure that this e-mail and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. CACI Limited. Registered in England & Wales. Registration No. 1649776. CACI House, Avonmore Road, London, W14 8TS. ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/
