Sorry, misunderstood. Not sure what you having trouble with, but take a look at chapter sever of this manual. It covers the setup in detail.
http://www.rocketsoftware.com/u2/epubs/pdf/wintadmin.pdf ----- Original Message ----- From: "Carl Dula" <[email protected]> To: <[email protected]> Sent: Monday, November 08, 2010 11:21 AM Subject: RE: [U2] UniVerse on Unix - enabling SSL UniAdmin normally uses port 31438 as the default. Assuming you know this and did not change it, then your firewall must have port forwarding enabled to go from the WAN address you are using at port 992, to the LAN address of the server with uv at port 31438. Depending upon the type firewall you may need to specifically add a reverse rule that enables traffic from the LAN port 31438 to 992 on the WAN. Hope that helps. -------------------------------------------------------------- Carl Dula Voice: 973-227-8440 X111 Pulsar Systems, Inc. Fax: 973-227-8440 271 Route 46 West, Suite H209 email:[email protected] Fairfield, NJ 07004-2474 http://www.pulsarsystems.com _______________________________________________ U2-Users mailing list [email protected] http://listserver.u2ug.org/mailman/listinfo/u2-users
