I was trying to think what we had to deal with on W2008R2 that gave us similar 
grief, and it just came to me.  You must make sure that the users you are 
working with actually have permissions to the directory where the UV/UD 
accounts are.  They WILL NOT by default when these are in a directory of the 
root of the system drive on W2008R2!  This will result in the error you are 
seeing, as you will have your default directory in the right place but will not 
be able to access anything. This includes the VOC. Since you can't access the 
voc, the assumption for the uv/ud shell is that there *is* no VOC there, and 
hence the message.

Actually log onto your server as that user or use runas with cmd to see if you 
can access the directories that you believe you need.

HTH,
-----Original Message-----
From: u2-users-boun...@listserver.u2ug.org 
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Wjhonson
Sent: December-10-11 12:08 PM
To: u2-users@listserver.u2ug.org
Subject: Re: [U2] UniVerse/NT default login account




If there are no UV.LOGINS entries on the one, then don't create them on the 
other.
Go to the console attached to that server, log in as admin, start the UV shell 
(not telnet) to confirm that you can get to TCL IF you cannot, then your 
Universe was not installed properly.
If you can, then telnet from that system to get the login prompt in Universe 
and see if you can login at the Universe login prompt and get to TCL







-----Original Message-----
From: Kathleené M Hunter <kmhun...@resolutionprovider.com>
To: 'U2 Users List' <u2-users@listserver.u2ug.org>
Sent: Sat, Dec 10, 2011 7:10 am
Subject: Re: [U2] UniVerse/NT default login account


I do not believe that I have been clear on this issue.

Have a current server windows 2003/ UniVerse 10.0.21 where everything works.
All user are directed to the live account when then login. There are no entries 
in the UV.LOGINS. There is a register entry in "UvAccount" which contains the 
account name that is in UV.ACCOUNT.

On a New server windows 2008 R2 / UniVerse 10.3.10 set it up the same way and 
it does not work. So then I added the users to the UV.LOGIN and have they go to 
the live account but it does not work no matter what user policy is picked ( 
Home, Any, UV). I have stopped and restated the service after each change.



-----Original Message-----
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of David Jordan
Sent: Friday, December 09, 2011 11:39 AM
To: U2 Users List
Subject: Re: [U2] UniVerse/NT default login account

Hi Kathleen
Try any directory.  You will run into a problem with UAC in Windows and will 
have to set it to the lowest security level and then reboot.  Then try changing 
the directory and see if that works.

Regards
David Jordan

-----Original Message-----
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Kathleené M Hunter
Sent: Saturday, 10 December 2011 6:14 AM
To: 'U2 Users List'
Subject: Re: [U2] UniVerse/NT default login account

In UniAdmin I have the option set to ANY UV ACCOUNT, tried it as UV HOME and it 
still did not work.  On the window user account the profile has all the path 
blank.  Is there any way to know where it is getting this path from.
The only Admin user can log on because you have to enter a path. Everyone else 
is going to who knows where. I cannot make every user an Admin user.




-----Original Message-----
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of David Jordan
Sent: Wednesday, December 07, 2011 4:01 PM
To: U2 Users List
Subject: Re: [U2] UniVerse/NT default login account

Hi Kathleen
The uniadmin telnet area is where you resolve this.  It is currently pointing 
at their login directory on windows.  You have options to change to
login into particular uv.account, or directory.   There can be a problem
here with Windows UAC that inhibits this from working properly.  Are you 
getting a permissions error when you access the telnet menu in uniadmin.

Regards
David Jordan

-----Original Message-----
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Kathleené M Hunter
Sent: Thursday, 8 December 2011 9:57 AM
To: 'U2 Users List'
Subject: Re: [U2] UniVerse/NT default login account

We use wIntegrate to telnet to the server. The UniVerse logon prompt appears, 
the user logins in and enter their password. Then the message "This directory 
is not set up for UniVerse... Y/N". No matter what the user answers it logs 
them off.



-----Original Message-----
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Bill Haskett
Sent: Wednesday, December 07, 2011 12:53 PM
To: U2 Users List
Subject: Re: [U2] UniVerse/NT default login account

Kathleene:

When you say "...does not work", what does that mean?  With networking all 
kinds of things are happening and isolating the problem is imperative.

For instance, in order for anyone to log into our UD server, running on Windows 
2008 R2, they need to have a Windows user and be a member of the appropriate 
group(s) (those given to the dbms directory).  Active Directory adds a level of 
abstraction, but you should be able to create a simple domain user who has 
access to the machine.  Anyway, once the user is created and they're a member 
of the same group that the dbms directory gives "full"
privileges to, then you should be able to log in to the UV account (I can in 
UD).  When I make a telnet connection I should be able to see the UV login 
prompts.  This is also where problems might arise; if you can't see the UV 
login prompts your problems are prior to the user/group and UV login issue.

So, I guess my question is; can you be more specific regarding your problems?  
e.g. what appears, what you've tried, what were the results, etc?

HTH,

Bill

------------------------------------------------------------------------
----- Original Message -----
*From:* kmhun...@resolutionprovider.com
*To:* 'U2 Users List' <u2-users@listserver.u2ug.org>
*Date:* 12/7/2011 12:35 PM
*Subject:* Re: [U2] UniVerse/NT default login account
> Tried this and it does not work
>
> -----Original Message-----
> From: u2-users-boun...@listserver.u2ug.org
> [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Bill
> Haskett
> Sent: Wednesday, December 07, 2011 12:22 PM
> To: U2 Users List
> Subject: Re: [U2] UniVerse/NT default login account
>
> Open up UniAdmin and log into the server.  Go to Network Services,
> then Telnet Server.  Select the Users tab then edit the "DEFAULT"
> user.  Set the "Startup Directory" to what you want then save by
> clicking [Ok] (a couple of times).
>
> If users aren't logged in, try looking at their permissions.  We
> restrict permissions to our U2 dbms directories, so not everyone can
> log
in.
>
> HTH,
>
> Bill
>
> ----------------------------------------------------------------------
> --
> ----- Original Message -----
> *From:* kmhun...@resolutionprovider.com
> *To:* 'U2 Users List'<u2-users@listserver.u2ug.org>
> *Date:* 12/7/2011 12:12 PM
> *Subject:* Re: [U2] UniVerse/NT default login account
>> On the new box when I created the account I pick ones as my default
> account.
>> If there is someplace else let me know.  But my users are still not
>> being placed there. When a user logins into the new server, it states
>> that "This directory is not set up for UniVerse". SO I do not fine
>> know where they are being placed.  All administrators are prompted
>> for the account, but I do not want to make everyone an administrator.
>>
>> -----Original Message-----
>> From: u2-users-boun...@listserver.u2ug.org
>> [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Bill
>> Haskett
>> Sent: Wednesday, December 07, 2011 12:07 PM
>> To: U2 Users List
>> Subject: Re: [U2] UniVerse/NT default login account
>>
>> You can do this via UniAdmin (the old one not the new xAdmin).  In
>> UniData, this information is maintained on the Windows Server (I
>> suspect the same is true of UV).
>>
>> The default login is used by currently authorized Windows Users to
>> route them to a "default" dbms directory.  Quite useful.
>>
>> HTH,
>>
>> Bill
>>
>> ---------------------------------------------------------------------
>> -
>> --
>> ----- Original Message -----
>> *From:* kmhun...@resolutionprovider.com
>> *To:* 'U2 Users List'<u2-users@listserver.u2ug.org>
>> *Date:* 12/7/2011 9:43 AM
>> *Subject:* [U2]  UniVerse/NT default login account
>>> Can anyone tell me where identify the default login account for all
>>> users that log into UniVerse.
>>> I am setting up a new server and the old server it working fine. All
>>> the user login in with wIntegrate, there is no users in the telnet
>>> services listed, plus the user on the domain has no default path listed.
>>>
>>> Thank you,
>>> Kathleené
>>>
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users

_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users

_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users

_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users


_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users

Reply via email to