Is SELINUX enabled?  That's caused me headaches in the past.

bob little
applications architect
independent contractor
market america, inc.
1302 pleasant ridge rd.
greensboro, nc  27409
Phone: 336-698-4367
Cell: 248-675-5515
Skype: boblittle904


________________________________________
From: u2-users-boun...@listserver.u2ug.org 
[u2-users-boun...@listserver.u2ug.org] on behalf of George Gallen 
[ggal...@wyanokegroup.com]
Sent: Wednesday, October 09, 2013 1:34 PM
To: U2 Users List
Subject: Re: [U2] UV and Mount -t CIFS

Thanks...

I tried all the variations of sec - most mounted - some failed - but none 
allowed UV to LIST the directory
I also added ver=1.0

I may need to setup a ftp server on the printwizard machine, and work around 
that way until I figure it out.

We will be upgrading the RHEL5 to RHEL6 once our server issues are fixed - so 
maybe RHEL6 will be ok (or not)
Found a bunch of things different from RHEL5 to Fedora19  (switches in ftp, 
mailx and attachments and
Few others I forget at the moment).

George

-----Original Message-----
From: u2-users-boun...@listserver.u2ug.org 
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Bob Little
Sent: Wednesday, October 09, 2013 10:31 AM
To: U2 Users List
Subject: Re: [U2] UV and Mount -t CIFS

I had to add the sec=ntlm to the line in my /etc/fstab since about FC18 or so:

//shareName       mountPoint    cifs    
rw,credentials=.myCredentials,_netdev,sec=ntlm,users,nounix,nosetuids,file_mode=0644,dir_mode=0775
   0 0

bob little
applications architect
independent contractor
market america, inc.
1302 pleasant ridge rd.
greensboro, nc  27409
Phone: 336-698-4367
Cell: 248-675-5515
Skype: boblittle904


________________________________________
From: u2-users-boun...@listserver.u2ug.org 
[u2-users-boun...@listserver.u2ug.org] on behalf of George Gallen 
[ggal...@wyanokegroup.com]
Sent: Wednesday, October 09, 2013 10:16 AM
To: U2 Users
Subject: [U2] UV and Mount -t CIFS

Ok...

When I had RHEL5 and UV 10.0.2 running, If I did a mount using type cifs
   All I needed to do in UV was <1>F , <2>/mnt/mountname, <3>D_SOURCE

And I could list the directory, no problem.


Due to a server issue, we had to put an emergency server in place that is
Running Fedora19 (64 bit) and installed the UV 10.0.2 - which appears to
Run fine.

EXCEPT - when I mount the share

Now when I attempt to LIST the File (or OPENPATH /mnt/sharename) it bombs out
Gives me "Unable to open -filename-"

I can as non-root, go into this share, create files, delete files and modify 
files so it
Also works as root.

So, I'm not sure if this is a UV related issue or a Fedora19/Windows machine 
share problem.

Any ideas?

I'm currently doing:
mount -t cifs -o rw,username=windowsloginname 
"//Sharename",file_mode=0777,dir_mode=0777,cifsacl /mnt/printwizard

What we do is use lpd to print our PCL to printwizard (which works)
Printwizard then produces a PDF (which works)
Then we read the PDF from the share on the printwizard machine (which is what 
is not working).
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users
_______________________________________________
U2-Users mailing list
U2-Users@listserver.u2ug.org
http://listserver.u2ug.org/mailman/listinfo/u2-users

Reply via email to