7.73 miles with what 23 or 25dbi dishes? Sure you're aligned right and not on a side lobe?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 21, 2014 at 4:25 PM, Stephen Parac <[email protected]> wrote: > I'm having some issues with my first AirFiber5 link. I've successfully > installed an AirFiber24 link. I've used the link calculator and the > anticipated signal is -66 on both sides. > > Background: There are zero obstacles in the way of the link. One is > installed on the edge of a cliff, the other on the outermost edge of a > water tower 140' in the air. I've also confirmed there is little to no > noise operating on both frequencies. We've also verified the mounts are > perfectly level and plumb. We've also spent a significant amount of time > peaking the antennas and are 95% confident (we're going back out at the end > of this week) that the screenshots are as good as they are going to get. > I've also "bench" tested them and was able to adjust the output power > setting to get the desired RSSI, where I got the desired throughput. > > Given all of that, does anyone have any suggestion? I can't imagine the > issue is anything but for alignment, but we've spent a lot of time on > alignment and its hard to believe that's still the issue given how much > time we've spent out there. I've installed licensed links before and we > have a ton of experience, we know about side lobes and how to properly peak > equipment. > > On a side note, its hard to keep the link status as "operational" and the > remote sides of both links frequently drop and come immediately back. I > also can't seem to get the output power to match what I have it manually > set to. Finally, I have slowed the modulation rate down to try and assist > with peaking. > > Any advice is appreciated. > -- > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
